20 Most Recent Shark Cordless Stikvac Vacuum Cleaner sv800 - Page 4 Questions & Answers

open unit disconnect wire from switch and ground reconnect with new line close up unit

The model number is printed on a silver sticker located on the upper right-hand corner of the back of the unit. The date code is stamped permanently into the metal prong of the power plug and show the week and year of manufacture in the WWYY format. https://healthycanadians.gc.ca/recall-alert-rappel-avis/hc-sc/2015/53013r-eng.php

1. Unplug your mop and let it cool down
2. Empty up your water tank
3. See if the spray tip of your shark steam mop is blocked
4. Insert a paperclip into your mop's spray tip and move it back and forth. This will loosen debris.
5. Pour some white vinegar onto the mop head. Then rub it with a duster or rag. This will clear up further buildup in the mop head area.
6. Turn it on and try to use it as usual.

Hello, this is Ava with Think Crucial. To fix any noise issues that your Shark vacuum gives, a proper maintenance will do the trick. Most of the time ,cleaning the filters, checking for blockages and clearing the passageways will eliminate the noise You can purchase a wide variety of high quality Shark replacement parts for your Shark Vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10 https://www.thinkcrucial.com/search?type=product&q=shark I hope this was helpful. Ava B. Think Crucial Customer Care http://www.thinkcrucial.com/

you need to change it air cant get thru

The tube behind the trigger is crimped shut. disassemble to fix the tube,

If it's no longer making steam the boiler could be bad. Shark makes no replacement parts that I know of. Best thing to do would be call the company.

Suggest go online and locate parts diagram for your unit. Use care when dealing with electricity.

check to see if something has not stopped it up. On the bottom of beater bar attachment there is a access plate.

Call cust. service at Shark

Use CLR cleaner in it, let it soak for a day or so, dump it out. fill it with filtered or bottled water from now on

https://www.manualslib.com/manual/452541/Shark-Euro-Pro-384.html

call cust. service

call cust service they will help you

Take off all screws on base plate. Two are hidden under small wheels. Carefully pry under wheels with skinny flathead to pop them off

It is probably clogged

There might be a shortage in the cable or plug....

The indicator light flashing purportedly usually means the battery is low or the vacuum is being charged. https://bestvacuumhq.com/shark-vacuum-brush-roll-indicator-light-not-on

https://www.youtube.com/watch?v=p0mhOezbPLo

this is good for ALL Shark appliances, not just the steam cleaner you asked about http://www.sharkclean.com/