20 Most Recent Brother DCP 115C All-In-One InkJet Printer - Page 9 Questions & Answers

I can give you a link to the website. Click on the "Downloads" link and you will be guided to download the correct driver.

Click here to open the website.

If you wish to go directly to XP drivers page, click here.

After installing the drivers your printer should work; if there is a problem post it here.

Yes, in the color printer/copier industry, Cyan is the same as Blue.

The magenta cartidge.

unable to clean mean the waste ink counter need to be reset.. and the porous pad need to be replaced.. to reset ... press the Menu & Mono start keys then next press the up arrow key 4 times to make the machine enter the maintenance mode. Once in, enter 8 & 0 by using the up arrow key & SET keys. then press the mono start key several times untill the purge count appears on the LCD.
Then enter 2 7 8 & 3 by using the up arrow key & set keys to reset the purge count to zero. Last press the stop/exit key to return to the initial stage of the maintanance mode.
To exit enter 9 twice by using the up arrow & set key's to exit from maintenance mode.

The printer head of your tri-color cartridge are damage and it needs to be replace that's why they don't have blue color to print.

..if not mistaken, the error message is Unable to clean, which indicate you will need to replace the waste ink pad and reset the waste ink counter.. you will need to send to the local service centre to get it done..

Go into the printer utility and tell it you repalce the cartrage, or just shut down everything and reboot, the printer cartrage gets an electrical charge , thus the circuitry, and it should work

follow the link to download the driver or copy paste the link

http://download.cnet.com/Brother-DCP-115C-USB/3000-2118_4-80966.html

From the manufacturer. http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=dcp110c_us

I assume you are running snow leopard on a MAC os 10.6.

Please click on the link below and download and install file, this should resolve the issue.

Mac printer drivers.Brother printer drivers for Mac 10.6:
http://www.apple.com/downloads/macosx/apple/firmware_hardware/brotherprinterdriversformacosxv106.html

Get drivers here... http://welcome.solutions.brother.com/bsc/public/eu/gb/en/dlf/download_top.html?reg=eu&c=gb&lang=en&prod=dcp115c_eu_as

Hi there
If your printer has more than 1 ink in it then it will not work with out seeing the other ink in it.

All the best Pineworks

Hi you can try
This works with most Brother printers

Procedure how to reset the error 46 error (unable to clean). This can be done on every Brother inkjet machine with a numeric keypad.

- Machine off
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- press 80
- press the “mono start” button several times until you see “purge: xxxx”
- press “2783” in order to reset the purge counter. You will see: “purge:0000”
- press “99” to exit the maintenance mode

Now you are able to print again, but actually your ink absorber box is now full with ink. Ink flooding can happen if you don’t replace this ink box

Also can try.

Reset code.
Press menu then*2864 within 2 seconds (maint should be on the display and all the lights should be flashing, if not try again) press 80
then keep pressing black/mono start button until screen displays ‘purge count’
press 2783 to reset purge count
press stop/exit key
press 99
machine should return to normal

Many cases people used refilled ink and not the one from the manufacture thus it causes this issue.

Other cases is the print head is dirty or defect thus needs to be cleaned or repaired in order to work.

if you used and fell victom of refilled solutions please replace the print head in this printer.

Click here on dangers of using refilled solutions
http://www.fixya.com/support/r4622115-refill_print_cartridges_cost_money

its very true and I have been to many repair shops instructing techs on what to do.

thanks hope this information helps please do rate it and leave feedback, thanks Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Unfortunatly, because its a color ink jet machine you will need to replace the ink to print anything. The way its designed is that it has one printer head for all four cartridges.

When you replace the color ink you will deffinetly be able to print.

hi
go to folowing link you will get your printer drivers

http://www.liutilities.com/device-driver/brother-dcp-115c-usb-printer/

Hope this helps you in your troubles!
If it does, be sure to give me a thumbs up.

open the thing, theres probably a paper stuck in it!

The Ink sensor sounds like it needs to be replaced. This happens from time to time.

This message is printed because the ink of mgenta color is missing or cartige is running out of the ink. If u have put new inks then check whether they r inserted properly or not.

Thanks