20 Most Recent Whirlpool AKZ159IX Oven - Page 2 Questions & Answers

0answers
0helpful
1answer

Whirlpool oven fault codes

My oven has gone on lock, How do I get it off
8/25/2013 1:25:39 PM • Whirlpool... • Answered on Aug 25, 2013
0answers
0helpful
1answer
0helpful
2answers

Used our Whirlpool AKZ451 last night and

the same has happened to mine. i used it last night as usual and this morning the button just wont press?? did you manage to find out what was wrong?

thank you x
6/19/2012 4:32:32 PM • Whirlpool... • Answered on Jun 19, 2012
0helpful
2answers

I have a Whirpool AKZ451/IX/01

Hi.

There had been a short.I think the only replaceable fuse is the one built in with the power cord. This kind of oven usually do not have replaceable fuse in control board.

If the range top ignitor is not working, check the power cord first. If it is fused replace the fuse. If that does not help the power cord should be tested to check if it is broken. Test is done using a multimeter to make sure that the power cord circuit is not open or shorted..

The point where the short usually occurs when you replace the element is the fan wiring. Check fan wiring harness and the fan motor itself. If the appliance is tripping the circuit breaker the oven can be tested for few seconds with fan not connected. If it does not trip, then the fan is shorting.
If oven is tripping check also element's wiring.

If the oven is working (turning on) but there is no heath read temperature probe impedance, double check elements and wiring. The problem can be the temperature sensor located inside the cavity.

Regards.

Ginko
8/23/2011 2:32:49 PM • Whirlpool... • Answered on Aug 23, 2011
0helpful
1answer

How to reset. Stuck on demo mode

Hello & Welcome to FixYa

To reset the oven press the button 2 for 20 seconds and then set the clock. Please get back to me if you have any other questions.

Kevin

8/15/2011 9:13:08 PM • Whirlpool... • Answered on Aug 15, 2011
0helpful
1answer

Oven either not heating up

Hi,
If your electric oven is taking too long to heat or just not heating up right,then check out this tip that will give more detail about your problem.

Oven Problems Electric Oven is Heating Slowly or Poorly

heatman101 ;'

=-]
[
8/13/2011 3:56:23 AM • Whirlpool... • Answered on Aug 13, 2011
0helpful
1answer

WHIRLPOOL AKR 301 IS FLASHING

F-03 code indicates a failure with the temperature sensor. The sensor comes into the oven cavity on the back wall and is a little smaller than a pencil.

The most common reason for this error is a wire connection between the sensor and the control board. Try to measure the sensor with ohm meter, an read about 1080 ohms at room temperature if it is good.

Hope this helps.
7/20/2011 11:20:40 PM • Whirlpool... • Answered on Jul 20, 2011
Not finding what you are looking for?
Whirlpool AKZ159IX Oven Logo

135 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Cindy Wells

Level 3 Expert

6688 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Ovens

  • Whirlpool Ovens

Most Popular Question

oven display reads stop wont work

  • Ovens
Loading...