20 Most Recent Whirlpool RBD305PD Electric Double Oven - Page 5 Questions & Answers

HI, this is referring to the cancel key on your key pad. It is stuck open. follow the procedure below.

1. Check keypad connector for firm connection (keypad connects to control board).

2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Hello,

The E6-F2 error code means that the control board thinks there is a problem with the cancel button on the touch pad. Sometimes its due to a loose connection from the ribbon cable on the touch pad. You can push cancel and clear it and if within 5 or under the error code returns the touchpad needs to be replaced. But first check/have the connection checked to make sure its tight. The way modern things work though is grand and Whirlpool say if after replacing touchpad the error code returns once again the clock/control board is what needs to be replaced.

Gene

F2 - E6 Cancel key drive line open 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Hello ssuebe51
Welcome

Turn the power off to the oven.

Check the connection from the key pad to the clock.

If the connection is good then put back together.

Turn power back on and press the cancel button.

If the error code returns after 60 seconds then the keypad will have to be replaced.

Thank you huuum
Please remember to leave a rating

i got a tech sheet for your range accept this message as a fix ya and e mail me at [email protected] and ill send it back as an attachment just say f2 e6 code

my oven panel board say's E1 F2 what do I do

A lot of people seem to have ran into this problem. I had no luck finding a solution to this problem anywhere on the internet. I finally fixed this problem by replacing the control board. Wanted to put this info out here for others. The part swaps out fairly easy for all of you considering the fix yourself. Sears direct had the cheapest price.

Had the same problem. I repaired the board myself and ordered a replacement from sears parts direct. It is a repaired board not a new one but has the same warranty. You can get this board a lot faster. Here is the link. http://www.searspartsdirect.com/partsdirect/part-number/8302319R/0022/664. If you would like to repair your own board leave a post and I will help you.