20 Most Recent Motorola Mobility H550 - Bluetooth Headset - Black/Silver Wireless Headset - Page 3 Questions & Answers

the default passkey for every bluetooth device is usually 1234. try it and let me know if it works. u have to pair it and enter the same passkey with your mobile/celfone.

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF, then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

Hi,

You can download the manual in PDF format by clicking this link:

http://static.compusa.com/pdf/Motorola-H550-Manual.pdf

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

The default numeric passwors should be either "0000" or "1234".

http://www.fixya.com/support/r5009033-put_most_bluetooth_headsets_into_pairing

0000

Try this?
http://www.fixya.com/support/r5009033-put_most_bluetooth_headsets_into_pairing

Try '0000' (four zeros).
Hope it works for you.
Cheers! Carlos

0000

Enter the passkey: 0000

You can get the manual on link below if you need. The manual tells you how to pair to phone.

http://www.motorola.com/Hellomoto/Master%20Lists/Product%20Manuals/Static%20Files/US-EN/H550%20Bluetooth%20Headset%20QSG.pdf

Good Luck and please rate 4 thumbs for the free answer.

0000 works!

most of the codes r four 0000

Yes when it turns red, then its charging. You may want to get the quick start guide from here(Free download). This will give you all the basic info you need about your headset.
http://www.retrevo.com/support/Motorola-H550-Headsets-manual/id/7624dj378/t/2/
Downloading instructions. Click on the get manual button on the right hand side. In the next page, scroll down, enter the captcha and hit download now.

it us definately 0000

You will need to reset the bluetooth by... turn on bluetooth (switch towards mouthpiece), then hold both volume buttons along with the call button for 10 seconds. Turn it off (switch back), then switch on again, wait a couple seconds and it should have a full blue light. That means it is in pairing mode, then go to your cell phone in bluetooth settings and add a device, it should come up within no time. Add the device and the passcode is 0000. Enjoy being hands free!!

Erase bluetooth's memory first. Hold both volume buttons along with call button for 10 seconds. Then shut it off and back on. When you turn back on it will take a couple seconds and will stay lit blue. At that time, you need to go into your phone's bluetooth status and add a new device. The passcode is 0000. Good luck!

You need to reset the bluetooth and remove all other devices. Hold both volume buttons along with holding call button for 10 seconds. This should reset your bluetooth, then follow all directions.

Hold the volume buttons on the side while holding the call button for 10 seconds. It will reset the bluetooth and remove any other devices it may have been paired to. Then turn it off, back on and it will eventually stay lit blue and then you need to set it up through your phone. I hope this helps, I had the same problem and mine is working fine!

Most everytime, the passkey for any bluetooth device is factory default "0000".
Try that!

Me either, Red light comes on for a sec. when plugged in then i cant get a blue light or any other light at all!