20 Most Recent Danby DDR586R Dehumidifier - Page 4 Questions & Answers

try searching for " Danby dehumidifier model DDR070BBCBD8"

try looking here and using a search engine next time. https://www.manualslib.com/brand/danby/dehumidifier.html

Be careful. i do not know. set at highest setting and let it run. while running, reduce setting to the lowest over a few minutes. at a lower setting you should be able to tell that the compressor has started. run it for 5 minutes, then unplug your machine. next, feel the cooling coils to see if they are very cold. if they are not cold, your unit needs to be serviced.

i don't know. my generic unit will do similar if i don't have the units moisture level set at a lower number. consider using your lowest setting as a test.

No, these are throw away items. It will cost more to repair than getting a new one.

Call or contact Danby to request assistance. Different model manual online: https://www.danby.com/products/dehumidifiers/ddr050beccdb/

Ck the fuse ,relay,freon psi wiring & compressor clutch

https://www.manualslib.com/products/Danby-Ddr251-3985071.html Danby DDR251 Manuals

ac units work by removing water vapor from the air That accounts for the water that is getting into the collector now if the water volume is increasing , it can be from an increase in humidity of the air portable units have to have an opening ( window or door ) to pass out the hot air and that allows more moisture laden air into the room. Maybe the next unit you get is fixed so that all of the doors and windows can be kept closed

Hi call support on 1-800-263-2629. cheers

Yes it is just a paper weight now.

It's probably running continuously. If so, its either set that way (or for too low humidity) or the unit is undersized for the area / humidity level. Check for sources of humidity that can be controlled otherwise, or add another unit. Please rate 4 stars if this is helpful. Thanks and good luck!