20 Most Recent Comfort-Aire BHD-301 Dehumidifier - Page 7 Questions & Answers

Thermostat probe sensor code

Hi! Please check the manual to Freidrich dehumidifier Appearance and Control panel Friedrich D70D User Manual Page 3 of 14

It appears to be a Humidity Sensor error. https://www.google.com/search?q=HiSense+30+Dehumidifier+F-9+error ..

see page 22 manual https://sps-support.honeywell.com/s/article/What-are-the-error-codes-in-an-E3-SA https://www.haierappliances.com/support/support-content/34659

Screws are normally hidden under the feet, under plastic plugs or under rounded screw covers. https://www.google.com/search?q=soleusair+hmt-d70eip-a+dehumidifier+leaks ..

It sounds like it needs servicing and recharging with refrigerant gas. It works by running the moist air over refrigerated elements where the moisture condenses and drips into the tank. Make sure you are on the right setting, most have 'blow air, remove moisture, and A/C'..

Page 18 of the manual says it is a 'parameter'. http://www.gullbergjansson.no/fileadmin/user_upload/Dokument/manualer/Avfuktare/Gullberg___Jansson_Manual_Avfuktare_till_inomhuspool_DP-serien.pdf Press CTRL+F and type 'C1' than press enter. There are 3 references to C1. ..

There are 6 rubber plugs in the top covering screws , 2 are all at hidden under the handle ends , the handle can be lifted to about 45 degrees and teased out an end at a time to gain access, the top then removes giving access to more screws which when removed along with screws under the bottom and inside the tank compartment allow the front and back to be removed for access

google MDK-65AEN1-BA9 manual they are readily available

normal it is an AC not dehumidifier. there is no humidity sensor, it operated on room temp not humidity. https://www.manualslib.com/manual/1015047/Challenge-414-0038.html#manual

cont button just means continuous run mode . the power light is lit , the full light is out . try reseating the water catch bucket a few times , most machines have a safety that wont allow the thing to operate if bucket isn't just perfect in its slot (you don't want water on your floor )

sadly we have no service manual to find out .Check with Edison

Question moved from Larry's Computer forum to Dehumidifiers My dehumidifier no longer works https://translate.google.ca/?sl=auto&tl=en&text=My%20deshumidificater%20ne%20fonction%20plus&op=translate Take it to a refrigeration repair shop.

Check that the wee magnet hasn't fallen out of the float.

Just fixed this problem with my DES14. Its a fault with the circuit board inside the machine and is very easy to fix, even for a novice. Here is how to do it: 1) Open up the machine by removing the screws in the case. (Make sure it is unplugged!) 2) Locate the circuit board on the side of the unit. 3) At this point you have two options. If you want a unit with full functionality you need to buy a replacement circuit board. I found one on MasterSpares (http://www.mastersparesonline.com/product/index/10147) It costs about 30 pounds. Simply remove the old board and replace it. 4) If you want a working unit for no extra cost (but without the functionality of the humidistat) then remove the rectangular white connector from the circuit board which has red,blue,white and yellow wires entering it. Add an extra wire between the central white wire and the red wire that is adjacent to the yellow. (see photo). 5) Re-assemble the unit. If you have opted for the free option the unit will work when you plug it in and switch it on but will no longer cut in and out with different humidities (or have the annoying warm up period). Thankfully the water overflow cut-out will still work. Hope it works for you! Feel free to ask if you are confused!

https://www.manualslib.com/manual/199712/Zenith-Zd309.html?page=15#manual

Impossible to diagnose without a full make and model, but likely a sensor issue. Your Google search query would be make model error code E9 https://www.google.com/search?q=dehumidifier+code+e9 ..

Clear the blockage and check the flow through the filter.

Had an issue with the water draining from the hose. Had worked before and stopped draining all of a sudden. Used a portable air compressor to blow it out. Went to the owners manual and saw that the drain outlet unscrews. Thought the drain hose was internal, taking the bucket off, then removing the drain outlet (2 screws, easy-peasy) Found the soft plastic drain line was kinked enough to stop/slow water from draining clearly. Plastic drain line needed to be heated with a heat gun/hair dryer with a metal file inside to restore the roundness of the tube. Keeping my fingers crossed.

If the dehumidfier is the right size then it would take a few days to week to get it down .