AT&T Lucent MLS-12D Phone - Answered Questions & Fixed issues

Have you tried getting another phone number? I'm not sure if you have access to the same service like the service at https://www.numbersupermarket.co.uk/08-numbers, but you can actually install an app with this service and have different phone numbers going to one phone. Try looking for a similar type service to help solve your problem. Best of luck!

You can turn on privacy either by programming it in system programming or you can program a privacy button on your set. To program a button on your set, press feature 00, press the button you want to be a privacy button, and prerss feature 07. press feature 00 to exit programming.

There is no way we would be able to speculate as to what this persons PIN was.

Try this google: AT&T Lucent MLS-12D There's a number of potential answers to your problem/s.

This is what I have: Intercom 777 99# password 1234# 9 3 1 1 6 * # (to by-pass selector code changes) press 1 to record a new greeting, when done, press 1 * # to save changes

fast busy signal (plural fast busy signals)

1. (telephony) An audible signal on a voice phone line that sounds more frequently than a standard busy singal, indicating that notransmission path to the called phone number is available.

What Does Fast Busy Signal Mean on Cell Phone eHow

If you want to transfer directly to the voicemail without ringing; hit FEATURE 14 then the extension you want.

You will need to pull that call on hold, then dial the extension of the person you wish to transfer it and then push the transfer button to connect them together. If you have any other problems with this particular Avaya model you can always download this great manual. It really helped me a lot with my problems. Good luck! :)

Does the light flash when you get a call ? Check the volume slide button - it might be set to low

How to set my extension to not ringing my extension on incoming calls? model is Panasonic KX-T7730

Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist’s extension to Immediate Ring and the lines at the users’ extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users’ extensions -with the receptionist providing backup -set the line at the users’ extensions to Immediate Ring. Then set the line (or lines) at the receptionist’s extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist’s extension.
Programming
To change the way outside lines or pools ring at an extension:

1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
   • Immediate Ring - on steady
   • Delayed Ring - flashes slowly
   • No Ring - flutters quickly
3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
4. Continue programming or exit programming mode.

you must read the owner manual section troubleshooting.Otherwise you must call to the company supplier support for to get help.God bless you

Try setting to 3-4 rings and see if vociemail kicks in , if not try reseting the phone

It doesn't have one. The voice pair (3+4 or 4+5 on an 8-pin jack) has 24 volts DC and the data pair less, but the power to run the phone comes from both pairs, or more probably from the voice pair.Carl

http://dstech1.com/changing-time-on-a-partner/

Partner ACS, any release
Changing the time on a Partner system must be done from extension # 10 or 11. 1. At station(Ext.10 or 11) press feature, 0, 0
2. Press the left intercom 2 times
3. Enter # 103
4. Enter the correct time in 24 hr. format, for example:
* to set the time for 09:00 A.M., enter 0900
* to set the time for 04:45 P.M., enter 1645
5. Press feature, 0, 0

For this problem contact your mobile service provider......

LOL Yeah, there must have been a reason for using it, but you better remember the undo code.

On your main line, *77 sets and *87 unsets Anonymous call rejection. In our system, if you wait until the ring is answered, the lady in the box will tell you that "your service to block anonymous callers is OFF"

Carl

From Ext 10 or 11>
Dial feature 00>
Hit the left intercom button twice>
The display will show "System Programming"

To remove the Ext. from group 73
Dial #502>
The display will show 'Group"
Dial 3 for group 73
The display will show "Extension"
Dial the Ext # of the phone that needs to changed
Dial 2 to un-assign the Ext from Group 73

To add the Ext. to group 72
Dial #502>
The display will show 'Group"
Dial 2 for group 72
The display will show "Extension"
Dial the Ext # of the phone that needs to changed
Dial 1 to assign the Ext to Group 72

Dial Feature 00 to exit System Programming and save the changes

Be sure to ask me if you need more information

You will need to reprogram the entire system. Manuals can be found at telemanuals.com.

Or call in a pro....

What voicemail do you have? There are a ton that can be on that Partner system.