20 Most Recent Uniden DECT 6.0 Cordless Telephone Expansion Handset - Page 2 Questions & Answers

My phone is only ringing once before going to voice mail.How can I increase the rings to 3 rings

it could that the battery is not keeping a charge. or the land line is bad. change battery first. sometimes new batterys are bad.

when you have a problem with anything under warranty, you take it back for new units or a refund and anything under 12 months old is under warranty if you have lost the receipts get a copy of your bank statements as that shows where it was bought , how much it cost and when That is a legal document to trigger a warranty action or refund

I would recommend an app called LEO Privacy. It can help you add the disgusting phone numbers to blacklist to stop spam and harrassing phone calls from bad guys. LEO Privacy Applock Boost Hide Android Apps on Google Play

Without the model number of your Uniden phone, I don't know which silencing feature you are dealing with. Some Uniden handsets have a Silent Mode. To toggle this on and off, press and hold the # key (below 9) for 5+ seconds when the phone isn't in use. When the silent mode is enabled, the handset will ask for a length of time for the 'no-ring' option. If no key is pressed, then the Silent Mode will continue until the # key is held again. Other Uniden phones have Do Not Disturb. The button to enable/disable this will be on the cordless phone base. The answering system will automatically turn on and none of the handsets will ring when this feature is enabled. You can also set the ringer volume to zero. Depending on the phone, you can reset this by pressing the volume up/down buttons or going through the menu. Look for the Ringer Volume in the same section of the menu as the Ring Tone options. If you need additional information, please add a comment with the model of your phone. I hope this helps. Cindy Wells

You might try to reset the Voice Mail Waiting Indicator ( V M W I ). To reset the Voice Mail Warning Indicator on the D1680 and similar handsets: 1. press [menu] 2. scroll down to "Global Setup", press [select] 3. scroll down to "VMWI Reset", press [select] 4. scroll down from "No" to "Yes", press [select] 5. handset will chirp, blinking lamp goes out, 6. press [END] Other models, check your manual. The model number is on a small sticker under the battery in the handset -- enter this number at www.manualslib.com to get a free copy of the User's Manual. Good luck! ---------------