Panasonic KX-TGA101S Cordless Handset - Answered Questions & Fixed issues

I had the same problem but different panasonic phone 1311 model, I tried the first anonymous suggestion, drained the batteries(takes 2 AAAs) and now it seems to be charging normally.. already at 3rd bar now after a couple of hours of charging. Thank you anonymous.

there is always a way to fix, but may out way the price of new phone. I think you may be able to get a replacement hand set resonable. Panasonic KX TGA101S DECT 6 0 Expansion Handset Silver https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&cad=rja&uact=8&ved=0ahUKEwjMkMDj1YTLAhXEKx4KHYeDDuoQFgg1MAQ&url=http%3A%2F%2Fwww.walmart.com%2Fip%2FPansonic-DECT-6.0-Expansion-Handset-for-KX-TGA1032S-1033S-1034S-KX-TGA101S%2F5700418&usg=AFQjCNGp9HO6Z8KeQ-TfDqhWXCSIJFbRPQ Panasonic Cordless Home Expansion Handset

Phone is defective seek help of service center .

Changing the handset Setting:1 {MENU}2 {UP or DOWN arrow}: “Handset settings” {OK}3 {UP or DOWN arrow}: “Display settings” {OK}4 {UP or DOWN arrow}: Select the desired setting.5 {OK} -> {OFF}

Changing the handset Setting: 1 {MENU} 2 {UP or DOWN arrow}: "Handset settings" {OK}

3 {UP or DOWN arrow}: "Display settings" {OK}

4 {UP or DOWN arrow}: Select the desired setting.

5 {OK} -> {OFF}

ftp://ftp.panasonic.com/telephone/kxtga101/kx-tga101_im.pdf The answer should be in here.

You mean unplugged it from the power outlet or the RG45 wall jack? OK so if the battery is fine and you unplugged the power from the source, then the issue is with either the cord itself or the charging unit. Just because the little red light comes on does not mean it is working properly. Put a multi-meter on the charging tabs to double check for continuity. Sometimes and as weird as this sounds, it just takes unplugging a nearly spent power pack/inverter to finish the job so to speak. If you unplugged it from the RG45 then you need to look at the pins in the RG45 wall jack to see if you inadvertently bent one out of shape.Phone won't work if there's no signal. Wish I could help more. Good luck with that issue.

Program --> Auto --> ** --> Program (Pulse to DTMF)
Program --> Auto --> ## --> Program (DTMF to Pulse)

Try reading this manual it should answer your questions. http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf

Sounds like the antenna on the base station is not receiving, or the cordless handset is not transmitting -OR- the sets have never been registered to the base station (please look up registering to base station, if the set has never been registered)

Did the cordless set work before?

The base station or the handset may just have a hick up, I would un-plug the base station and leave it un-plugged... now get all the cordless set(s), and take out the batteries from the cordless set(s). Wait for about 15 seconds for all the power to drain out of the sets, then re-install the batteries.

Once all the cordless sets are back up and working, plug in the base station and wait for about 1 minute.
This forces the base station to re-establish and link between the base station and the cordless sets.

Good luck

Hi, Maybe this will help. You can download the manual here: http://phone.manualsonline.com/manuals/mfg/panasonic/tga101s.html Panasonic is always helpful when it comes to support for their products so give them a call.

The KX-TGA101S isn't an answering machine. To set the greeting, refer to the documentation for the answering machine. If you require further assistance, please add a comment to this question and identify the answering machine.

menu .. select

Hello, I'm sorry but I can't help with this problem but there is web site with contact information: http://shop.panasonic.com/shop/model/KX-TGA680B?support=y Maybe they can help you.

The directions for changing the dialing mode from tone to pulse can be found in the owner's manual for the main base unit. Press the [MENU] button then choose "Set tel line". Then choose "Set dial mode", then choose Pulse or Tone and press [OK]. Additional details can be found in the below link. http://service.us.panasonic.com/OPERMANPDF/KXTG1031.PDF#page=14

http://service.us.panasonic.com/OPERMANPDF/KXTGA101.PDF When you get to ringer settings press select, then using the arrow keys scroll to ringer tone, choose one of the tones or melodies then select save and then select off to get out of the menu you should have chosen a new ring tone.

Have you tried to see if it was bluetoothed? An was the bluetooth on on your Galaxy?

try blue tack or you can bey a putty that setts solid in 10 mins from one of the pound shops

We recommend you access the telephone menu and ensure your Dialing mode has been set to Tone.

call 1st number, hit flash, call 2nd number, flash again to bring all to the same line.