Elgin Travel Alarm Clock - Answered Questions & Fixed issues
Why does time keep switching to military?
you have it set on 24 hour time instead of 12 hour time
it will change over at midnight to military time as that is when the 24 hour period ( military time ) starts
3/14/2016 3:41:34 PM •
Elgin Travel...
•
Answered
on Mar 14, 2016
•
1,834 views
I am using my mother's Elgin 3400E travel alarm
On my Elgin alarm clock, you just push the nap button and it will add 15 minute increments for a nap. I haven't figured out how to turn it off if I change my mind or wake up earlier than I set it.
12/30/2011 5:25:48 AM •
Elgin Travel...
•
Answered
on Dec 30, 2011
•
435 views
I have an elgin anniversary
Usually the problem is a bad batch of batteries. Try taking one from something that is working and see if that is the case.
3/20/2011 10:45:55 PM •
Elgin Travel...
•
Answered
on Mar 20, 2011
•
1,206 views
How do I change to degree mode on my porpo YH-2000
To change to degree mode on your Porpo YH-2000 calculator, you can follow these detailed steps:
Turn on the calculator: Press the power button to turn on the calculator.
Access the mode menu: Look for a button labeled "Mode" or "MODE" on your calculator. It is typically located near the top or side of the calculator.
Enter the mode menu: Press the "Mode" button to enter the mode menu. This will allow you to change various settings and configurations.
Navigate to the angle mode: Within the mode menu, use the arrow keys or navigation buttons on your calculator to scroll through the available options until you find the angle mode setting. It is usually denoted as "Deg" or "DEG" for degrees.
Select degree mode: Once you have highlighted the angle mode option, press the corresponding button or key to select degree mode. The specific button or key may vary depending on the calculator model, but it is usually labeled with the same abbreviation used for degrees ("Deg" or "DEG").
Exit the mode menu: After selecting degree mode, exit the mode menu by pressing the "Mode" button again or any designated exit button on your calculator. This will save the changes and return you to the main calculator screen.
Verify degree mode: To confirm that you have successfully changed to degree mode, try entering an angle calculation or trigonometric function that involves degrees. The calculator should now interpret and display the results in degrees.
Openfit Shokz battery replacement?
Question edited for clarity, typo and CAPS.
Question moved from Cars and Trucks category.
Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries.
How long is the warranty on AfterShokz?
While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase.
Jan 11, 2019
https://www.google.com/search?q=Openfit+Shokz+battery+replacement
..
My roadking rk4000 wont charge. I turn it off to charge it but there is no indicator light at all, any suggestions?
Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first.
But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.
Can f2100 remote work on my dishtv box?
The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?