20 Most Recent LG CHOCOLATE VX8500 Cellular Phone - Page 7 Questions & Answers

As you have not specified in particular what is the unlock code required for you, i am giving the ways to unlock all the codes

NETWORK UNLOCK CODE:

You can unlock it by flashing your mobile if your mobile is a CDMA mobile...
The procedure for flashing your mobile is in the link below
http://hubpages.com/hub/How-to-Flash-your-cell-phone
It has an video explanation.

If your mobile is not an CDMA mobile , you can get the network unlock code(NUC) by just contacting the current network provider customer care department.It is free of cost.

The restriction code can be got from your old service provider..This restriction code is kept to prevent someone who stole the mobile from using it with another provider...

They will have a security check done with your date of birth etc..to verify whether you are the exact owner of the phone..

After that they will provide you the restriction code to unlock it and use it with another service provider..

Do not pay anyone for this seeing some advertisement over internet . That is all fake ads.

The above procedure works and you can verify that by seeing the rating of an happy customer here..
http://www.fixya.com/support/t4979448-need_unlock_motorola_razor_v3_from_optus

PUK CODE:

PUK code can be given only by your service provider which is specific for each and every mobile number.
Contact your sim customer care department over phone. Its free of cost to get the pin or puk no. If you cant contact through your phone get some other phone and contact them.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software...
Go to the below link and you can confirm that the above procedure works and there is a testimonial given by the customer too. http://www.fixya.com/support/t3079596-sking_puk_code

PIN CODE:

HI If you are asking for pin contact your service provider , he will give you a default pin .

If you try pin more than few predefined no of times your phone will ask PUK code which can also be given only by your service provider which is specific for each and every mobile number . Do not try PUK(new pin code) code many times or else your sim will be blocked and you will need a new sim.

Contact your sim customer care department over phone. Its free of cost to get the pin or puk no.
Go to the nearest service outlet of your service provider they can also help you.
There is no other go than the above procedure only your service provider can give it nobody else in this world nor any software..

SECURITY CODE:

If you are talking about the security lock code to enter into the phone then once it is lost nothing can be done except flashing the mobile . Because if anybody can give the security code created then who ever who steals your phone can get into it and get your valuable information.

So as safety precaution to avoid that they have designed it such that if you forget the security lock you have to reset the mobile memory by flashing the mobile at an authorized service center.So while flashing the mobile all the data in the mobile memory will be lost and you can again start using the mobile.

put it off to sundry it for some days.about 2 days then put it on everything should work

A request for a PUK code ("Personal Unlocking Key") will appear on your phone if your SIM card PIN code is entered 3 consecutive times incorrectly.

Your SIM card will then become "PUKed" or Blocked. This is a security measure to protect your service.

You need to call the Customer Service department of your cell phone provider and they will give you the PUK code which will unblock your SIM card.

It sounds like the battery has lost its ability to charge. Replace the battery and test again.

To get the text off the phone you can try installing the software that came with the phone as it might be able to read text messages of the phone.
The software link is available at http://ds.mobileaction.com/CDMA/USB/Phmgr/Pure/USBVX8500(V06)_V95.exe
& http://ds.mobileaction.com/CDMA/USB/PureModem/ModemSetup_Pure-CDMA_V95.exe
This is if you haven't got your CD that came with the phone originally.

Either limit your time on your phone, which helps to reduce how much money you spend, or put more money on the phone.

Hello,

I also experienced the same thing. What I noticed is that I had subscribed to some offers in my phone like ring tones, jokes, etc. That certain subscription kept on getting my money. I changed my simcard because I cannot trace back the list where I subscribe.

I have my new sim card and I am very happy with my phone now. You can do the same as what I did.

Thank you for using fixya
var geo_Partner = '82910b1e-9b92-42fd-b83f-fa09a0787ae7'; var geo_isCG = true;

Hi this is a very common problem with all flip and slide cameras,phones and even laptops and notebooks, the problem is to do with the data ribbon that connects the screen to the circuit board in the bottom of the phone.
now inside this ribbon are several single strand copper wires and over time open and closing the phone causes these to break and you then lose the connection with the screen.

as this is such a common fault it makes the part itself cheap to buy and cheap to get fitted. it isnt something you can do your self as you need specialist tools to take the phone apart and to fit the data ribbon.

if you want it repaired the cheapest place would be one of those small independent phone shops as the bigger one will have to send it off and you will be charged extra for this, the smaller phone shop should be able to fix it whilst you wait or the next day at the latest.

its up to you if you think the phone is worth getting fixed then it wont cost much to get done.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks,,,..

Hi this is a very common problem with all flip and slide cameras,phones and even laptops and notebooks, the problem is to do with the data ribbon that connects the screen to the circuit board in the bottom of the phone.
now inside this ribbon are several single strand copper wires and over time open and closing the phone causes these to break and you then lose the connection with the screen.

as this is such a common fault it makes the part itself cheap to buy and cheap to get fitted. it isnt something you can do your self as you need specialist tools to take the phone apart and to fit the data ribbon.

if you want it repaired the cheapest place would be one of those small independent phone shops as the bigger one will have to send it off and you will be charged extra for this, the smaller phone shop should be able to fix it whilst you wait or the next day at the latest.

its up to you if you think the phone is worth getting fixed then it wont cost much to get done.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks.....,,,

You may have a problem with your speakers, or your volume may be off.

activate it by calling the service provider the phone is compatible with

http://global.mobileaction.com/download/download1.jsp?phoneBrand=8&modelID=712&go=+Go+


Follow this link. it has all the Dl's you want.

This is a great website where i learned a lot about flashing phones from these guys!
If you run into any trouble just shoot me an email and ill be glad to help!
www.mobile-files.com

[email protected]

The phone has hung up because there are errors in the software. So to reset remove the battery and the memory card from the phone. Using your PC , scan the memory card for any corrupt files or media files with virus- it is possible when they are downloaded from unsafe sites. If so remove or format the card. Now replace the card and battery and switch on the phone. If the phone hangs up then it is confirmed that the software is corrupt and will need a reinstallation. Seeking help from the authorized service /support centre is most ideal. Take estimate and decide.

You can get the PUK code from the service provider and Unlock it from PUK....

Hi,

You can download and print the instruction manual in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Kindly let me know if you have any difficulty in downloading the manual.

Thanks for using FixYa.

What Code You cannot able to Figure Out....If you need Unlock Code means..Don't search anywhere,You can get the Unlock code at reliable cost and Unlock the mobile......
You can get the LG CHOCOLATE VX8500 Model Unlock code here
http://www.mobileunlocksolutions.com/lg-vx8500-chocolate/rs1wp9/

First if phone is lock dial *228 and then press 1. That reset your code for last four digit of your cell #
(phone will reset ,no any data will be lost)
If you do not know a cell # and phone is still lock then press .
#4357*4357.and you can see phone number that's your lock code last four digit... That's for LG VX8500 (VERIZON)

(or)

Here's good news and bad news. The good news is that you might well have forgotten that the default password on the phone is 00000000 (that's eight zeroes). The bad news is that if you've changed it to something else and that's what you've forgotten, you might well need to take the phone in to a service center to have them help you break it back open

for manual copy this link to your address bar and click ENTER-->http://docs.phonedog.com/lg-vx-8500-chocolate-manual-3959.pdf
If nothing works , then you have to buy the unlock code here-->http://www.foneszone.co.uk/unlock/how_to/LG/VX8500.php
Thanks for rating good luck

Hi there, To activate your phone, you may contact to your service provider LG CHOCOLATE VX8500 Unlock Code, they can activate your phone fast, it's hassle free. I suggest to visit LG Unlock Code site, they will provide an accurate code with easy to follow instructions on how to unlock your phone. Once your phone is unlock, it will work with any network worldwide and don't have to stick with one network.

Hope this is helpful.
Thanks.