You can bring it anywhere in the country,you can even go to the mall,there's a lot of service shop that will assist you. they will simply program your phone.
* download the Software link : http://www.mediafire.com/?58l1ccehswstcwy * download firmwares here : http://www.pbmobilezone.co.cc/2010/09/motorola-p2k-flashfiles.html * you need a V3 usb cable.
1. install the software,just follow the instruction and wait till the installation is done. 2. download the particular firmware model and now you're ready to go. 3. open the software.
* Load flash file (firmware of the particular phone model) * Hold "*" "#" and "power key" for bootloader (need this method so pc will recognize the phone) * Connect phone to pc * Tick start and wait until finish
Hi,
Improve the Fixya.com experience for everyone by voting!
Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I'm using ATT as an example.
Phones are naturally unlocked, but a service provider might lock them
When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.
Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.
Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.
Your phone has to be unlocked by the carrier. LG, Motorola, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.
A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:
?? logging in to your my wireless Account online
?? using their Technical Support Chat
?? calling Customer Care at 1-800-331-0500
To get your phone's PUK code online from ATT:
?? Log in to your my wireless Account.
?? Select My Services under My Account.
?? From the My Services screen, select My Phone/Device.
?? Select Unblock SIM Card.
?? The Unblock SIM screen will display your PUK code.
Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.
Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."
There are three other ways to unlock a phone:
?? The carrier will unlock the phone for you at one of its retail outlets;
?? You can do it yourself by clicking on this link Free Unlock Codes ,
?? Pay $3.89 at the following website: www.theunlockshack.com/. I have absolutely no affiliation or relationship with The Unlock Shack or its principals.
I trust that this is helpful and solves your problem. All the best
Ben
Hi,blank screen for Motorola phones are usually caused by the flex of the phone. Sometimes it might appear in white screen display too.
The flex of the phone is located inside the phone, it controls the functions of the screen an also the keypads of the phone.
The flex is a thread like object that is located inside the phone. To see the flex, you will need to disassemble the phone to get to the flex of the phone.
After replacing the phone flex, your done.
Also it might be the screen of the phone. But in other to know if it's the screen, you will need to test a new flex.
You can get a replacement flex from any of the phone repair stores around you.
The screen blank might also be from the screen itself. But to confirm if it's the screen,you willneed to replace the flex first,and after replacingthe flex,if it doesn't display,then you will know that it's the screen that is damaged.
PUKs, or personal unblocking keys, are used to unblock a mobile phone
which becomes blocked. Mobile phones may become blocked when a PIN
(personal identification number) is entered incorrectly on three
consecutive occasions. In some instances, the phone may become blocked,
which requires a PUK to unblock it, and in other instances, the SIM
(Subscriber Identity Module) card itself becomes blocked and again will
require a PUK to unblock it.
Mobile phones are also blocked when they are reported stolen and if
there is an outstanding payment on the account.
It is important to differentiate between unblocking phones (using a PUK)
and unlocking mobile phones (using another type of code).
NOTE: It is a criminal offence for anyone to attempt to unblock a mobile
phone, other than the network provider who put the block on the phone.
If your phone has become blocked by mistake, for example you have
entered the PIN incorrectly on three consecutive occasions, then you
need to contact the mobile phone network operator with your details. To
explain a little more, specific to your mobile phone network, You need
to go to your Service providers, web site & navigate your way to the
specific PUK details for your mobile phone network operator. Usually
you have to Register your phone to get a PUK code.
change its battery and try to turn it on. if problem continues its a hardware problem already and the possible solutions is go to a cellphone repair shop.
Hi, NETWORK UNLOCK CODE: To unlock your mobile you need to get network unlock code(NUC) from current service provider via phone or go to service provider office. While you get the Network unlock code ,the service provider customer care officer will ask for your personal details to check whether the mobile belongs to you only.If they are satisfied with your answers they will provide with the network unlock code. RESTRICTION CODE: To get restriction code you have to call your previous service provider. This code is provided to prevent in case of theft taken place the other person cannot use your phone in other networks. While you get the restriction code ,the previous service provider customer care officer will ask for your personal details to check whether the mobile belongs to you only.If they are satisfied with your answers they will provide with the restriction code. Thanx
hi, as far as my experience unlock codes are the best method to unlock your phone, i used codes from http://www.theunlockspot.com/motorola-motorazr-maxx-v3/rs10wp9/ to unlock my phone and it worked well,you need to specify the country and network provider
There are several methods for unlocking mobile phones, but codes are best one, because it is easy and safe also, you can get the unlock code for your Motorola model mobile phone, through this site http://www.theunlockspot.com/motorola-motorazr-v3/rs10wp9/ It provides the step by step instructions and easy methods for unlocking mobile phones at a reliable cost itself..........
