Top 20 Polaroid TLA-01511C 15 in. LCD Television - Page 9 Questions & Answers

0helpful
1answer

Can i use your black web universal remote on polaroid tv?

fixya site doesn't have any remotes , spares or anything else
4/28/2018 7:42:55 PM • Polaroid... • 142 views • 0 helpful votes
0helpful
1answer

Polaroid tv has green and purple lines without any picture, wondering if a t con board will help with this problem

Unhook the left ribbon cable going from the panel to the Tcon board if the green and purple lines stay then its the panel if they go away try a new board
2/26/2018 7:36:15 PM • Polaroid... • 505 views • 0 helpful votes
0helpful
1answer

Just gone back to sky how do I reconnect sky box to Polaroid

notify sky for account and setup information
5/7/2018 3:44:47 PM • Polaroid... • 50 views • 0 helpful votes
0helpful
1answer

Does the TLA-04011C Polaroid Television support a ROKU streaming device? I've hooked everything up and the HDMI7 port is set to 480dp, how do I change this in order to setup my ROKU?

Ive never heard of a set having 7 HDMI inputs...go to HDMI 1 and use that for your Roku device and all should work fine, nothing to adjust or set other than select the HDMI one input
3/16/2018 1:42:05 PM • Polaroid... • 149 views • 0 helpful votes
0helpful
1answer
0helpful
1answer

How do i reset my polaroid 9-in.tablet with dvd player pdt 9000 please help

Help - My Polaroid PDT 9000 DVD Player will not turn on, what's the issue?
12/10/2017 2:17:07 AM • Polaroid... • 1,209 views • 0 helpful votes
0helpful
1answer

Why does my polaroid tv screen black out?

  • Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/
  • To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board.
2/21/2018 4:06:03 AM • Polaroid... • 87 views • 0 helpful votes
1helpful
1answer

Polaroid TDAC-02212 will not turn on. The red light is on and turns to blue momentarily when the power button is pushed. The screen will flash a little then back to off, with the red stand by light.

It may fix it with a new power supply but personally I'd recycle it...that wasn't a good set when it was new, lots of issues, Ive personally never seen a good Polaroid TV, they should have stuck to cameras as they were great back in the day.
12/10/2017 9:36:38 PM • Polaroid... • 415 views • 1 helpful votes
0helpful
1answer

My question is: why has my Polaroid digital radio suddenly stopped working? I would like some advice please from one of your experts. Thank you.

To my knowledge most Polaroid products haven't been made in decades suggesting time for an upgrade. Good luck.
1/16/2018 9:31:19 PM • Polaroid... • 126 views • 0 helpful votes
0helpful
1answer

No channels able to be watched

What do you mean by "it has the channels coming up right?
2/6/2018 1:39:03 AM • Polaroid... • 49 views • 0 helpful votes
0helpful
1answer

Polaroid tla-04011c LCD TV screen gets darker at times

Replace the main board
2/4/2018 3:01:55 AM • Polaroid... • 50 views • 0 helpful votes
0helpful
1answer

My tv isn't working,, its plugged in and on but the red flashing light keeps flashing 8 times then its asif its going to come on & doesn't! Could you please help me & get it working again? Thanks.

Obtain your owner's manual and see what that error code means, then follow the manual's recommendations.
11/21/2017 7:40:32 PM • Polaroid... • 325 views • 0 helpful votes
0helpful
1answer

I have a polaroid hdtv 32gsr3000 and trying to hook up a sanyo dvd to and when we play a dvd it has no coler all black and white we are using 3 cables that came with the dvd player.

Make sure you connected wires right both on player and tv. There are Two ways to connect it. 1. Use 3 wires: white, red, yellow. White and red are for audio and yellow is for video. Yellow need to be connect to yellow port on TV and DVD player 2. 5 wires. Again red and white are for audio. And there is another red plus green and blue. Those 3 are for video and have to be connected to corresponding ports on TV and pkayer. Make sure you don't mix up red wires
12/3/2017 1:02:23 PM • Polaroid... • 225 views • 0 helpful votes
0helpful
2answers

I have a Polaroid TV, model 3211-TLXB. My

I'd shop at Best Buy. If that TV is from 2008, it's done.
12/22/2017 3:51:03 AM • Polaroid... • 129 views • 0 helpful votes
0helpful
1answer

Stuck on standby

I'm a little confused here as without the 5 volt standby voltage the blue light won't come on, the TV will be dead like its not plugged in, are you sure you were on the right pin when you measured that? It almost sounds like your on the PSON or PWR-ON pin.
12/24/2017 7:03:03 PM • Polaroid... • 118 views • 0 helpful votes
0helpful
1answer

How do I fix a grainy/ patchy jumping/skipping dvd.

Hello, Bloody_dark -Often those who rent DVDs or borrow them from the local public library mishandle them and do not know how to handle them properly.From your question, it seems the DVDs are either scratched or dirty (possibly with food residue.)This website gives step-by-step instructions on how to clean the readable side of a DVD:https://www.wikihow.com/Clean-a-DVDIf, after cleaning, the DVD still is grainy, patchy, skipping, etc., it is probably scratched. What I do when I have a rented or public library DVD which is scratched, I return it with a "sticky note" attached to the DVD box stating it is scratched and that I properly cleaned residue from the readable side of the disc, so that the rental business or the library staff will know that the DVD is damaged and can choose to replace it. There are ways to remove scratches from DVDs, but I do not recommend anyone try those steps if they do not own the DVDs themselves.Note: I am a librarian by profession and have seen firsthand how people mishandle DVDs. I'm from the 45-rpm and 33-rpm vinyl record generation. We learned how to properly handle those vinyl records so as not to scratch them. Bottom line: We were taught to only handle the vinyl records (and subsequent CDs and DVDs) by their outer edges. For CDs and DVDs, they can be held between the thumb and forefinger, along the inside and outside edges.
1/10/2018 6:51:03 PM • Polaroid... • 63 views • 0 helpful votes
0helpful
1answer

I have a Polaroid 19 inch TV/DVD Combo. I put a

Go to YouTube.. search how to get a stuck DVD out...
I would do this first then see if everything is working again..Also some DVD's that are boot leg don't work to good...not saying you have one but the paper label sometimes is thicker and they get stuck
11/11/2017 9:42:03 AM • Polaroid... • 271 views • 0 helpful votes
0helpful
2answers

I plugged my PS3 into my polaroid television via a

How do I get it work
10/28/2017 8:57:02 PM • Polaroid... • 324 views • 0 helpful votes
0helpful
1answer

I have a Polaroid p40led14 have sound but no picture

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main digital board.
10/5/2017 11:37:51 AM • Polaroid... • 495 views • 0 helpful votes
Not finding what you are looking for?
Polaroid TLA-01511C 15 in. LCD Television Logo

117 questions posted

Ask a Question

Usually answered in minutes!

Top Polaroid Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Polaroid Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Polaroid Televison & Video

  • Polaroid Televison & Video

Most Popular Question

polaroid tla 01511b goes blank after

  • Televison & Video
Loading...