20 Most Recent
Logitech Harmony 550 Remote Control - Page 8 Questions & Answers
Harmony 550 upload using dialup
When updating the Harmony Remote with highspeed, this even takes a few min to complete. its not an issue with the remote, its the internet connection. Your computer is not sending and reciving information fast enough.
Samsung PN58b530 tv and harmony 550. When setup
Samsung TV's have Anynet automatic input switching. This severely conflicts with the Harmony Remote as they both do the same jobs; Switch inputs automatically. We would like for you to disable this feature on your Samsung TV using your original remote, so the Harmony Remote will work properly.
Disable Samsung Anynet+
1. Press your Tools Button.
2. Scroll down to Anynet and press your Select Button.
3. Once on the Anynet screen, please press your Left/Right Button(s) to select the Off Setting on the Anynet+ (HDMI-CEC)
4. Scroll down to the Auto Turn Off and select No.
Once this is completed, please turn off your TV and all device and power them back on using the Harmony Remote.
It blinks safe mode
To solve this problem you need to update the remote firmware.
Load Logitech Harmony Remote (install it from original CD or download it from Logitech) them connect your remote to any USB port and select UPDATE REMOTE option.
My 550 remote stopped working. The light under
Please try re-installing the firmware.
1. Log into the Logitech Harmony Remote Software on your computer
2. Click on the Downloads button at the top-right corner of your screen
3. Click on the Firmware button. Follow the onscreen instructions to upgrade the firmware on your Harmony remote
4. Once the firmware upgrade is complete, click on the Update Remote button
5. Test your remote.
Volume control
Try this:
1. Login to your Harmony Remote Account.
2. Click on the Settings button next the Watch TV Activity.
3. Choose Review the settings for this Activity.
4. When the software asks what device are you using to control volume, please choose the TV.
5. Continue through the setup until you are brought back to the Home Screen.
6. Click on the Update remote button and follow the on screen steps.
7. Once the update is completed, please test the Watch TV Activity.
Batteries died. changed out batteries now shows
If you remove the batteries for about 10-20 seconds and put them back in, it will take it out of safe mode.
If that does not fix it, press and hold the power button while you put the batteries back in and then remove the batteries again for 10-20 seconds.
This should fix the issue!!
Have a nice day!
Remote completely stopped working.
these remotes are throw away devices you can't fix them they don't even sell parts for them, so there is really nothing to be done here except make sure the batteries are ok which you have and that isf the remote has some how lost its programming code for the device or devices it operates, but that is highly unlikely.
My remote for the harmony 550 says welcome to
First I would check to see if any of your buttons are sticking. I have found that this is a common problem with the 550 remote. I really like this remote but if nothing works check your buttons to see if any are pressed under the plastic. This remote can only work one button at a time so if one is being pressed it will not work.
Harmony 550 Rrmote Control
that's a load of **** -- get manuals here: http://logitech-en-amr.custhelp.com/cgi-bin/logitech_en_amr.cfg/php/enduser/std_adp.php?p_faqid=3938
The LCD screen says
One of your buttons was pushed and stuck in. Look closely at your buttons and pop up the depressed button.
After replacing batteries I get
Hi thee,
WELL first of all you can again remove the battery and insert them again after 1 minute...
Press the power button for 5 second and turn on the receiver device also (IR). hope this helps...
post further comments for more help or information ....
Good Luck!!
Thanks
Harmony 550 is locked on safe mode
Try this:
- Remove the batteries from your remote
- Press and hold down the 2 button while connecting the remote to your computer
- The Harmony Remote LCD screen should display Upgrade Success
That should do it. If it doesn't work try pressing all the keys and make sure none are stuck in the down position and then retry the above steps.
Not finding what you are looking for?