Motorola Mobility Bluetooth Hands Free Headset Wireless Headset - Answered Questions & Fixed issues
It always flip light
Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone
Hope this helps
11/11/2021 3:51:51 AM •
Motorola...
•
Answered
on Nov 11, 2021
•
111 views
Cant connect. What type of device is the Motorola h350?
Motorola H350 is a Bluetooth headset device. Free yourself from confining wires and immerse yourself in music with wireless Bluetooth stereo headphones! You can comfortably enjoy your favorite music without messing with annoying wires!
1/11/2017 5:52:30 AM •
Motorola...
•
Answered
on Jan 11, 2017
•
252 views
Why wont my unit charge?
If it is steady blue then it is ready to be found by your phone. If you see the headset in your phone remove the pairing and repair again. You should hold the multifunction button after turning on until it goes steady blue if you aren't getting a steady blue light in order to pair it.
7/9/2015 6:49:50 PM •
Motorola...
•
Answered
on Jul 09, 2015
•
253 views
Set up 8004247A
I try to pairing my nexxtech with my phone and it does not work
3/12/2014 10:50:15 PM •
Motorola...
•
Answered
on Mar 12, 2014
•
124 views
How to pair Motorola T215 to my phone
First, go to your settingsThen, go to bluetooth (make sure it is turned on)Finally, tap search for devices and tap on the one that says Motorola Bluetooth Headset.
9/28/2012 11:26:50 PM •
Motorola...
•
Answered
on Sep 28, 2012
•
641 views
Havn't used bluetrek S2 in a while. How do I link
go to the menu on your phone select manage connections turn on bluetooth then you'll see search listen, etc. position on search don't press yet
get your ear piece ready:
press the on button and hold it until you see a solid blue light (not blinking but solid) if it blinks try again until you get a solid blue light (it takes about 5-8 seconds) when that happens go to your phone and press search it will look for devices (it may find several)
look for your earpiece model and select it
it will ask for a code or passkey, type 0000. Then it's going to ask if you want to bond or pair click yes and it will connect
check on the connection manager again and your bluetooth should be on and connected.
if it works for you, don't forget to rate me
thx
9/27/2012 12:49:15 AM •
Motorola...
•
Answered
on Sep 27, 2012
•
631 views
I got a new cell phone and I need to reprogram my motorola bluetooth, but I no longer have the directions, and need to figure out how to reprogram it.
Well, as you have specified neither your headset nor your phone model, please, take a look at
these general tips I posted a long time ago.Hope they might address your questions, somehow.Anyway, please, let me know if you need further informations. In this case, tell me your headset and phone models.Best regards,Carlos
7/1/2012 7:51:06 PM •
Motorola...
•
Answered
on Jul 01, 2012
•
67 views
Not finding what you are looking for?