Panasonic CF30 Notebook - Answered Questions & Fixed issues

i would say the system has crashed i would take it to your local computer shop and ask them to check it out If you need further help, reach me via phone at https://www.6ya.com/expert/david_eb7ea98642566cc6

hit the numbers lock key

Hi,

Make sure that Number Lock is not turned on. (You can tell if Number Lock is turned on by looking for the LED indicator light shaped like a padlock with a number 1 in it.) If this light is on, press the NumLk key to turn off Number Lock.

That should resolve your problem.




Regards.

If the hard drive has been formatted it will not boot unless you install an operating system. If you had wanted to format and leave the disk able to boot the correct command is Format "Disk Letter":/S

Uninstall the SP2, or just mouse over the START menue and right click then chose properties then costumize then find the power surge then thick ALways hide...i beleive there is un update for this but you will need to llok for it as it is bug in windows.

There are lots of factors why your systems hangs when booting. One is, you have low memory running with bigger files content. Second, you have enough disk for the system more than is required. Third, a system virus which will affect the processing of your command. Fourth you have a low processor.
When it happens, free some files that will cause the slow processing. If because you have a low processor and outdated one, and you have low memory card, you have to replace the two with a higher and updated hardwares.
Thanks.

sounds like the software driver for the built in sound needs to be installed. Go to panasonics web site and see if they have any software for download.

If memory serves, there are four screws that are removed, that hold the keyboard header on. (The strip of plastic under the LCD screen)

Can't recall at the moment, if there are rubber caps, (Covers), over the screw heads. If so, you just ease up one edge of these, with a small flat tip Jewelers screwdriver.

They are held in place by a glue, that's akin to rubber cement. They should stick right back on, if you keep the glue side clean.

(In otherwords, watch how you set them down, in a safe place. Non-glue side up. Good luck trying to keep the little beggars off of your fingertips, or the screwdriver tip. The glue works real well! lol!)

They made a few variations of the keyboard used.
It may have double-sided sticky tape, or it may have flat lock pegs.

For the version with the stick tape, cut it. You peel the rest of the tape off, after you have the keyboard removed. Then apply new double-sided sticky tape, when installing the new keyboard.

For the version with the lock pegs:
Slide the keyboard forward as much as you can. There are four lock pegs, that help secure it in place.
(Flat tabs of plastic. Two on each side of the keyboard)

Now lift up on the end of the keyboard that is nearest to the LCD screen. Don't go crazy, as there is a cable you have to disconnect!

There is a function key combination that turns on the back light, I believe it is Fn+F12. Hod down the FN key and press F12. The first press turns the backlight on full brightness and succesive presses dim it until it is turned off.

I'm sorry but I don't have my CF-30 in fromt of me at this time, it could be Fn+F10. There is a blue symbol on the correct key and I believe it looks like a light bulb.

If this doesn't work, you may need to have a hotkey driver installed.

Try logging on using last known good configuration.
As you boot up, tap the F8 key repeatedly, then choose this option from the menu.
If you do get on, you may want to restore your system to a date before the corruption occurred by using system restore.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread. If I've managed to answer your question or solve a problem, please take a moment to kindly rate this post....thanks!

Try the Power Reset procedure. https://www.google.com/search?q=Panasonic+FZ-55+tough+book+not+shutting+down ..

Unplug all the extensions and then plug them back in one at a time. https://www.google.com/search?q=Panasonic+KX-T7730+unable+to+call+another+extension ..

Question translated to English. We are a North American website. https://translate.google.ca/ Covered here, and also videos https://www.google.com/search?q=Failure+to+connect+to+server+(007)

Not available. Obsolete.

There is no driver for 8.1 or 10. The support stopped in 2007.

See Error Code List in Service Manual of machine. E05-01 is Interlock Switch Failure. Panasonic DP-C405 Service Handbook (Page 339 of 808) ' ManualsLib

I would send it in for repair. If there are 3 contact pins when there should be 4, you will need that part that holds the pins. It is unusual to have a Service manual for cameras, but here it is and shows disassembly. https://www.google.com/search?q=panasonic+lumix+fz28+repair+manual ..

• Fn is locked (pressed-down) until you press another key. Use this when pressing difficult key combinations. • Popup menu icon on/off Start up the Hotkey Settings. Click [start] - [All Programs] - [Panasonic] - [Hotkey Settings]. Make the settings. [Use Fn key lock] When using an Fn key combination Press Fn once.

The usual cause is leaky line output stage or transformer. Lift the line output transistor out and see if the voltage rises. If it does, scrap the TV as it is totally obsolete. If it doesn't, repair the power supply, if you can source the obsolete parts.

Question edited for clarity, full 'make model (what it is)'. Question moved from Television and Video category. It appears you are working on the Serial Port https://www.manualslib.com/manual/304435/Panasonic-Toughbook-Cf-19khrag2m.html?page=72&term=GPS&selected=2#manual Service Manual for CF-19CHBAXBM may be close enough. https://www.manualslib.com/manual/553265/Panasonic-Toughbook-Cf-19chbaxbm.html ..