Cellular Innovations HFBLU-CX1 Wireless Headset - Answered Questions & Fixed issues

try 0000 (four zeroes) or 9999 (four nines)

bluetooth - charging mashine problem bring it to recheck the charger

headset won't pair with me phone and i have tried 0000 and 1234 and 12345

i do not know the passkey how do i find out

Had the same problem. Paired fine with multiple devices (headset, computer, auto.) Then all of sudden BT will not connect. Cannot re-pair (unable to find device(s)). Had 1st phone replaced. Within about 6 months, the 2nd Dare did the same thing.

Most blue tooth manufactures use a 4 digit pin pairing code they are as follows 0000,1234,1111,or 9999 i hope this helps

When you put the device into pair mode and find it on your phone. You select the device and what happens, what do you mean go away? Try doing a hard reset on your phone, to do this remove the battery from your phone while it is powered on. Reboot it, when it comes back again re-attempt to pair the device to your phone (make sure it is still in pair mode).

Rylan

The passkey is just "0000" without the quotes of course.

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

The passkey or pin code is 0000.

I believe default passcode for this device is 1234. There are typically only two passcodes that the majority of bluetooths use: 1234 and 0000

1ST IT IS NOT A MOTOROLA PIECE. IF IT IS A MOTOROLA PIECE I APLOGIZE BUT I MAKE THE HFBLU-10K. IF ITS A CELLULAR INNOVATIONS HFBLU-10K YOU CAN EMAIL ME AT [email protected] AND I WILL SEND YOU A COPY OF THE MANUAL

email [email protected] and i will send you the manual

it seems that the battery inside the unit may be losing memory. you can send it in for warranty by following instructions on the warranty card provided in the package.

Please make sure the bluetooth is in pairing mode, you know this when the unit is flashing red/blue at the same time. you can achieve this by first turning the unit completely off. once the unit is off then hold down the power button until you see the re/blue flashing light. then have your phone search for a new device again. if this does not work you can always take the battery out of your phone while it is still on (for about 5-10 seconds) so that it can reset. then try the process again.

hold down the multi-function (power) button until you see a red/blue lights flashing on the piece at the same time. once you see this the unit is in pairing mode and you just have to have your phone search for a new device or add a new device..once it finds it just follow the prompts on your phone. passkey is "0000"

the problem seems to be the charging box. if the red light goes off relatively quickly after you place the bluetooth in the box then it is not gaining a charge. you have a warranty with this item that you can claim by following the instructions on the warranty card provided in the package.

follow the instructions on the warranty card and send it back to us. we will issue you a free tested replacement.

no it is not. please send the item back to us by following the instructions on the warranty card provided in the package.

go to your phone and turn on your blue tooth.that might be the problem.

if it is new the normal default is 0000