Top 20 Cellular Innovations HFBLU-CX1 Wireless Headset Questions & Answers


bluetooth - charging mashine problem bring it to recheck the charger

Cellular... | 268 views | 0 helpful votes


Most blue tooth manufactures use a 4 digit pin pairing code they are as follows 0000,1234,1111,or 9999 i hope this helps

Cellular... | 53 views | 0 helpful votes


When you put the device into pair mode and find it on your phone. You select the device and what happens, what do you mean go away? Try doing a hard reset on your phone, to do this remove the battery from your phone while it is powered on. Reboot it, when it comes back again re-attempt to pair the device to your phone (make sure it is still in pair mode).

Rylan

Cellular... | 109 views | 0 helpful votes


The passkey is just "0000" without the quotes of course.

Please make sure you rate my answer 4 thumbs up, it is extremely important to me. I would be forever grateful if you could do so. If you need more help on this question please just respond to my answer here and I will get right back to you.


Thanks
Tim

Cellular... | 324 views | 14 helpful votes


Had the same problem. Paired fine with multiple devices (headset, computer, auto.) Then all of sudden BT will not connect. Cannot re-pair (unable to find device(s)). Had 1st phone replaced. Within about 6 months, the 2nd Dare did the same thing.

Cellular... | 203 views | 0 helpful votes


i do not know the passkey how do i find out

Cellular... | 267 views | 0 helpful votes


The passkey or pin code is 0000.

Cellular... | 253 views | 6 helpful votes


I believe default passcode for this device is 1234. There are typically only two passcodes that the majority of bluetooths use: 1234 and 0000

Cellular... | 313 views | 7 helpful votes


email lynwood@mizco.com and i will send you the manual

Cellular... | 871 views | 1 helpful votes


the problem seems to be the charging box. if the red light goes off relatively quickly after you place the bluetooth in the box then it is not gaining a charge. you have a warranty with this item that you can claim by following the instructions on the warranty card provided in the package.

Cellular... | 615 views | 2 helpful votes


go to your phone and turn on your blue tooth.that might be the problem.

Cellular... | 558 views | 0 helpful votes


1ST IT IS NOT A MOTOROLA PIECE. IF IT IS A MOTOROLA PIECE I APLOGIZE BUT I MAKE THE HFBLU-10K. IF ITS A CELLULAR INNOVATIONS HFBLU-10K YOU CAN EMAIL ME AT LYNWOOD@MIZCO.COM AND I WILL SEND YOU A COPY OF THE MANUAL

Cellular... | 397 views | 2 helpful votes


no it is not. please send the item back to us by following the instructions on the warranty card provided in the package.

Cellular... | 595 views | 1 helpful votes


follow the instructions on the warranty card and send it back to us. we will issue you a free tested replacement.

Cellular... | 247 views | 1 helpful votes


hold down the multi-function (power) button until you see a red/blue lights flashing on the piece at the same time. once you see this the unit is in pairing mode and you just have to have your phone search for a new device or add a new device..once it finds it just follow the prompts on your phone. passkey is "0000"

Cellular... | 419 views | 8 helpful votes


I eventually found that you need to:
--hold the large button on the headset down for >5 secs to activate the headset.
--on your cellphone....set up the headset as a "Bluetooth" device
(password is usually 0000)
--then click on the large button on the headset to recieve a call.

The headset works fine....but I cannot fathom how anyone who never had a "Bluetooth" device would ever figure out how to do this.

But then again...I did ......didn't I?

Cellular... | 231 views | 1 helpful votes


Please make sure the bluetooth is in pairing mode, you know this when the unit is flashing red/blue at the same time. you can achieve this by first turning the unit completely off. once the unit is off then hold down the power button until you see the re/blue flashing light. then have your phone search for a new device again. if this does not work you can always take the battery out of your phone while it is still on (for about 5-10 seconds) so that it can reset. then try the process again.

Cellular... | 235 views | 2 helpful votes


if it is new the normal default is 0000

Cellular... | 92 views | 0 helpful votes


Try 1234 or 0000

Cellular... | 123 views | 3 helpful votes


it seems that the battery inside the unit may be losing memory. you can send it in for warranty by following instructions on the warranty card provided in the package.

Cellular... | 401 views | 0 helpful votes

Not finding what you are looking for?
Cellular Innovations HFBLU-CX1 Wireless Headset Logo

Popular Tags

55 questions posted

Ask a Question

Usually answered in minutes!

Top Cellular Innovations Radio Communications Experts

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Brad Brown

Level 3 Expert

18136 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Cellular Innovations Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cellular Innovations Radio Communications

  • Cellular Innovations Radio Communications

Most Popular Question

pass key

  • Radio Communications
Loading...