20 Most Recent
Rival RC61 6-Cup Rice Cooker - Page 4 Questions & Answers
Gadgets vs107 top and bottom rival seal a meal
ind helpful customer reviews and review ratings for Seal-A-Meal VS107 ... Also, you don't have to search for Rival bags..any 5-mil vacuum seal bag will ... Two things, you have to get the top of the bag straight and flat for it to make the seal. ... I checked out lots of different brands before deciding to buy this lower cost model.
Gasket rival vs107 top and bottom
Bag will not seal
• Check that there aren't any gaps, folds, wrinkles or holes in pre-sealed edges.
• Moisture of foods with high liquid content will prevent the bag from
sealing properly. Cut bag open and wipe top inside of bag and reseal.
• Make sure you've placed the bag in the proper place. When making a
bag from a roll, make sure end of cut piece is on Sealing Strip, NOT over
Lower Sealing Gasket or in Drip Tray.
• Make sure you give the appliance time to cool down. Wait at least 20
seconds between seals.
If all the above have been verified and the machine will still not pull a vacuum, you will need to replace the upper and lower gaskets.
Our roaster is not making any heat. It's a programmable 20 quart Rival roaster. We don't have the manual to know if we're doing something wrong
1. Place the REMOVABLE ROASTING PAN into the ROASTER OVEN BODY.
2. Make sure that the TEMPERATURE CONTROL is in the OFF position, then plug cord into a 120 volt AC outlet.
3. Turn the roaster on by turning the TEMPERATURE CONTROL to the desired temperature.
4.Preheat for 15 to 20 minutes. (INDICATOR LIGHT will shut off when temperature is reached)
5. Place ROASTING RACK into the REMOVABLE ROASTING PAN, put food on the RACK, and place the LID on the roaster oven.
NOTE: Some foods or recipes do not require the ROASTING RACK to be used.
6. When finished, turn the TEMPERATURE CONTROL to the OFF position and unplug roaster oven from outlet.
7. Remove
if it plugged and plugged to roaster and it still does not work move a known working plug. still does not work, there is no repair.
Not finding what you are looking for?