20 Most Recent Krups XP4030 Espresso Machine - Page 9 Questions & Answers

Hello Linda Foster, If there is NOT an OWNERS MANUAL immediately available.. there are a huge selection of KRUPPS machines... Chose from the attached list... Find the trouble section... Read & heed Results for krupps coffee maker var myCallback function document ready... Hope this helps... (or REPOST with model number for BETTER QUALITY answers). Carnac the Magnificent

You need to ask a better question that includes the model number and exactly what program or part of the program you have issues with.

what is your modle sir

You can only get that wheel as part of the grinder, it is not possible to remove the burr to replace the plastic part. It's factory fit during manufacture. There are 2 reasons I'm aware of to cause that, rarely it can be a stone in the beans but more likely you have an internal leak causing the grounds to bind up together from the steamy environment within the housings. Also if the relief valve in the distributor is sticking it can cause the chamber to stay very wet.

Error 12 There was no pulse from the ejection switch so possibly a switch problem or worse still some grief on the control PCB. This will also be associated with the cleaning the drawer problem. From memory the switch/es are located above the used grounds bin.

my dear sir it looks that you had some internal leaking .due to this the water went on to the electric parts . now you need to fest dry it properly then plug it in again and make sure it doesn't leak again if not check there is two thermal fuse on the ac supply sow make sure you unplug first see that you do the same as type if this get blown again then you have to change the pcb

Hello, Roos - You may find the instructions here helpful: https://www.thespruceeats.com/how-to-make-yogurt-in-an-electric-yogurt-maker-909013 Best wishes.

Running it fully through the cleaning cycle step by step will normally get it gone.

what type of krups do you own model thanks

Did you try the Krups web site for the manual? First place I'd go.

I think you will find it here: http://safe-manuals.com/brand/krups

http://www.fixya.com/support/t9196987-need_manual

Look for a red re-set button. If it has one push it in. If no re set button it likely is dead. Make sure power outlet is working first.

https://www.boulangerhttps://www.boulanger.com/ecommerce/notices/4/3700342411294_n_0.pdf.com/ecommerce/notices/4/3700342411294