20 Most Recent Gemini XL-500 Turntable - Page 4 Questions & Answers

Is there something 'special' about them? Power cords are common. Take one to an electrical supply store, radio Shack or just look around the house for an unused one.

Look in your control panel on your computer and check the sound settings. For instance I have Sound Max on my PC and the imputs have to be set on to listen to different sound sources. Also there are level controls on it that can be set to zero.

Hi! Please open the volume control icon located on the lower right of the screen and check out the auxillary. Mostly they are muted so you will need to turn them on. Hope this helps and thank you for using FixYa!

Hi,

It's depending on the brand you're using.
But for general you have to check your;
Battery
Frequenty of the handheld, same as reciever
Frequenty of the receiver, same as the handheld
Gain adjustment in the handheld.
Gain on the receiver.
Check on the receiver if there's any RX when you switch on the handheld.

Good luck,
Gerard

As far as I know, Gemini does not release schematics outside of their authorized service centers. If only one channel is out, you shouldbe able to A/B the two to find the problem components. If the side is completely blown, the most likely problem is the output transistors. Start with those and work back. If you need further details on the method, update this with any questions.

Dan

Hi there,

just read about your issue with the gemini's 02, have had the same ones since december 06, and have had the same problems as you, mainly my 'play' buttons that broke down into the machine.

The first time I had it repaird by the shop I bought them at, after that had several times where the paly button broke into the machine. What I do now is to open the player by unscrewing the screws and it 'tape' the button where it should be.

The tricky thing is that when opening the player, there's like a sound card on top of the buttons, so you need to get that tape in between the card and the button, I learned to do this with a tweaser;

Having said that, I will also tell you that I've had it with this gemini hassle and that I will move to pioneer soon;

Good luck!
O.

look for pre out on your gemini hook up phono cables to these then to any input on your reciever,eg cd, switch reciever to cd turn up and away you go

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.