20 Most Recent
Whirlpool Cabrio WTW6600SBT Top Load Washer - Page 8 Questions & Answers
What does F1 error mean?
Whirlpool Cabrio F1 error code - NOW A RECALL ISSUE! model # WTW6600SW2
Call Whirlpool or a repair center. The number for Whiripool is 1-800-253-1301
F1 error on cabrio washing machine
Whirlpool Cabrio F1 error code - NOW A RECALL ISSUE! model # WTW6600SW2
- I called Whirlpool 1-800-253-1301 today 10/15/08 and they said the F1 issue is now under a recall.
- Whirlpool scheduled a repair service -during our phone call- to repair this under a 'recall' & at 'No Charge' to me.
- I'll let you all know how it goes after the repair..
When washing dark clothes in the Cabrio washer I
We have the same problem with our BRAND NEW Cabrio - and those white dusty spots with our old washer were a major reason for getting a new washer. Very disappointing. I believe the white dust is also on light clothing but we can't see it. Since most of the "answers" are obviusly wrong (we already use liquid detergent, already use the auto dispenser, and nothing is blocked because ti's BREAND NEW), we've taken to wiping down the washer basket before we run our clothes. It seems wasteful to run Afresh every week before we do laundry. But wiping out the drum with a cloth works.
I am getting warm water when we have selected
If you turn off the hot water line, and you have cold water then suspect the water inlet valve. Unplug the unit and turn off the water to disconnect the water hoses. Pull out the washer and remove the back of the unit by the water hose inlet. The new valve is around $65.00 and is on connectors, which make it an easy fix.
Whirlpool cabrio loud noise
Check your bearings. This post will show you most of what you need to know about your bearings:http://www.squidoo.com/how-to-replace-bearings-in-a-whirlpool-cabrio-maytag-bravo-or-kenmore-oasis
It is leaking from the bottom during the wash
If you mean its leaking anytime you have water in the drum,the first thing to check is the drain hose connection at the back of the washer,You'll want to do this with the washer pulled out,(don't let the drain hose drop below the water level or you'll have a mess)If its not leaking there you should be able to look under the washer & see which connection it is(usually the inlet to the pump) Might be as simple as tightening the hose clamps.Hope this helps
Wont drain
Either your drain pump has failed or there is a coin or other object in the drain pump stopping it from pumping. I have both cleaned and replaced many of these pumps. Hope that helps.
Continue to receive DL (Door/Lid cannot lock)
Hi
A Door Lock Error occurs if the door cannot be locked. It will try to lock it six times before displaying the error code. It has happened because Door lock mechanism is broken or removed from door. It may also happen due to Door switch/lock unit failure. To resolve the issue follow these steps---1. Unplug washer or disconnect power.2. Check door switch/lock unit.3. Check the wire harness connections to the door switch/lock unit and Central Control Unit (CCU).Hope this helps...Please post back if you need more information.
Daniel
Unbalanced load
If your washer goes severely off balance you need part # W10112113 to fix it.
I have a Cabrio washer
Hi
It seems that it needs cleaning... you can run your washer with nothing inside it at
its hottest temperature setting with 2 cup of vinegar inside the unit. After
this clean the drain pump assembly completely, also clean the
drain hose and drain pump filter, the spots should disappear after doing all
this. Hope this helps...please post back for further assistance.
Daniel
Not finding what you are looking for?