Kenwood KDC-MP205 CD Player - Answered Questions & Fixed issues
Turn aux on on kenwood kdc-mp205
In order to access the AUX option the stereo needs to be in Standby mode. To do this just hit the SRC or source button until you reach the Standby option. Now hit the menu button and scroll up or down until you reach the AUX on/off option and just turn it on. Hope you find this helpful.
4/6/2021 12:37:24 AM •
Kenwood...
•
Answered
on Apr 06, 2021
•
18,336 views
Kenwood in dash cd player is blurry
Hi there,Sometimes, car owners inadvertently clean the displays with harsh chemicals, which can react with the facia plastic.The only method I can think of in this case, would be to try a light abrasive plastic polish such as Meguiar's Plastix or similar. These creams are designed to remove light scratches on plastics (such as headlight lenses etc), but in your case, we are trying to polish the display back to a satisfactory optical finish.Good luck.
3/14/2013 7:57:03 AM •
Kenwood...
•
Answered
on Mar 14, 2013
•
198 views
How Do i Turn on
Unless you turned it off, Kenwood radios automatically have the loud turned on when the radio is first powered up.
2/12/2013 7:27:46 PM •
Kenwood...
•
Answered
on Feb 12, 2013
•
585 views
How Do I Use The
you will need to purchase this wire,
Click Here one end goes in the headphone jack on your ipod and the other will plug into the stereo
9/19/2011 4:52:59 PM •
Kenwood...
•
Answered
on Sep 19, 2011
•
159 views
I have an amplifier connect
Hi, Thank you for posting your question on fixya. I will be happy to help you with this problem. Can you please give us some more information so I can better answer your questions.
What are you trying to use the CD , turner for...?is it for aux purpose or,just to play CD...?
Thanks.
8/26/2011 9:36:56 AM •
Kenwood...
•
Answered
on Aug 26, 2011
•
61 views
My truck keeps dying and
The blinking red light is to let thieves know the face is not on the radio and is not worth stealing. the blinking red light doesn't draw enough power to drain your battery.
4/25/2011 6:36:20 PM •
Kenwood...
•
Answered
on Apr 25, 2011
•
219 views
I need help figuring out
There should be a wiring diagram that came with the head unit. Check that and match up the colors to the on in the car. Assuming that you have the right wire harness that matches your car. There is normally a pattern that you'll catch on to when your wiring it. you should have 4 pairs of wire for the speakers, 1 ground, 1 hot, 1 for power ant., and an aux, also a clock, and maybe an ignition.
3/1/2011 6:22:18 PM •
Kenwood...
•
Answered
on Mar 01, 2011
•
298 views
Protect what does that mean
Unless there is something wrong with the head unit, there must be a
shorted connection. Try doing the same with no speakers plugged in and
see if the protection breaker trips.
If it does not, then one of your
speaker cables is shorted. Try installing the cables one by one, and
test it, to see which one is at fault. Other remote possibility, is
that one of the speakers is blown.
Hope this helps (remember to rate and comment this answer).
2/16/2011 4:48:16 PM •
Kenwood...
•
Answered
on Feb 16, 2011
•
56 views
HOW TO SET CLOCK
press and hold the menu button for a few seconds. use the am/fm buttons to scroll through the menu. when you get to clock mode, press and hold either the seek up or seed down buttons for a few seconds. when it starts flashing, use the am/fm buttons to adjust the hour and the seek up or down to adjust the minutes. press the menu button again to exit. to exit the menu, press the menu button once again.
12/15/2010 5:13:44 PM •
Kenwood...
•
Answered
on Dec 15, 2010
•
82 views
Not finding what you are looking for?