Logitech Webcam - Answered Questions & Fixed issues

go to 'Control Panel', 'Sound', 'Recording', and select your Logitech as the default device.

I need help find the driver for a webcam, i dont know the brandname, it olny detects that it a CIF single chip device

Many factors can affect the image quality of your pictures. If you are experiencing blurry images, please try adjusting the focus ring located around the lens. This will allow you to focus the camera image on objects at different distances. Also, make sure there is good lighting. Improving the lighting conditions can improve the image quality considerably.
Connection Issues:
If the image quality is poor while transmitting video over the Internet using video enabled programs such as MSN Messenger, Yahoo! or AOL Instant Messenger, your connection speed to the Internet directly affects the image quality of the transmitted video. Corporate LAN, DSL/cable modem connections will result in the best image quality experience, while dial-up connections may result in choppy and overall poor quality because of the slower connection speed. Even broadband connections such as DSL/cable modem may experience choppy video at times because of Internet traffic or slow upload speeds. If the image appears clearly in the camera software, most likely your Internet connection may be responsible for the poor image quality in your video program.
Changing Display Adapter Settings:
If you are still experiencing a distorted, fuzzy or grainy image, you may need to change the settings for your display adapter. For optimal image quality, please make sure the video display adapter is set to display at least 16-bit high color or higher. To change the color palette please perform the following steps:

1. Click on "Start," "Settings," and "Control Panel."
2. Double-click on the Display icon.
3. Click on the tab labeled Settings.
4. In the dialog box labeled Color Palette, verify the video mode is set to 16-bit (high color) or 24-bit (true color).
5. Also, check with the manufacturer of the video card for updated video drivers.

Low Light Boost:
If you cannot do anything to improve the lighting situation, some Logitech video cameras have an option for "Low Light Boost." If there is an option for "Low Light Boost," try enabling the "Low Light Boost" in the QuickCam software. To do this:

1. Open the QuickCam software.
2. At the bottom right hand corner of the camera image box, click on the arrow next to the QuickCam icon.
3. Choose "Advanced Camera Settings".
4. Under the Image Enhancement box, place a check mark in the "Low Light Boost" option.
5. If that does not improve the image quality, try adjusting the other image settings, such as contrast, saturation brightness, gain and white balance.
6. Click OK when your are done.

Using Latest Software:
Finally, make sure you are using the latest release of Logitech camera software. You can download the latest release from the Logitech Downloads + Parts page.

Sounds like you have a corrupt driver.

Follow the instructions below and it will work.

Disconnect the Camera from the USB port and reinstall the CD or Downloaded software program.

When the program asks you to connect the camera to the USB port, do so and it should work.

Then to use it on the Web, do this.
Web Camera's have to be setup on the program they are to be used with. Just installing the
camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

this driver works: https://drive.google.com/file/d/1TYjNpxEM9DJx43jrS1DUfqs2MxR2x6lx/view?usp=sharing

1) make sure your mic is set as default
TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer
2) Check you have DirectX 9 or later installed to support your cam
3) You may have to re-install the software - browse the photo gallery and click on your model - check out any known problems as well

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

Windows 7 and windows vista are not same they have some differences Difference between window 7 and window vista is explained in this link https://www.diffen.com/difference/Windows_7_vs_Windows_Vista

Find a software which has good graphics for the cam n used it when using the cam

you might a defective camera! have you tested it on another computer? if you get the same results then it is, if not then you might to look into getting the proper codecs or speak to their IT support if there is such a thing or hire a professional.

Hi you can go here to download the software/driver just select the model of your zebronics and Operating system.thanks hope you rate my response
http://www.zebronics.net/driverdownloads.asp

Go to their website and look up the versionof camera you have or ask the question using google

It would make our life easier if you told us what make and model your webcam was

The genuine LVPrcSrv.exe file is a software component of Logitech QuickCam by Logitech. A background process that starts with Windows, this application is the core file that allows your webcam to function properly in Windows. It communicates between the hardware driver and the operating system, allowing video to be seen and recorded with the QuickCam software. Located in Switzerland, Logitech creates a variety of peripheral devices for personal computers. Their Quickcam software supports the Google produced internet TV service Google TV. Click to Run a Free Scan for LVPrcSrv.exe related errors LVPrcSrv.exe file information LVPrcSrv.exe process in Windows Task Manager The process known as Logitech LVPrcSrv Module or LVPrcSrv Module belongs to software Logitech QuickCam or Logitech or Logitech Camera Software or Logitech Webcam Software or Logitech Process Monitor or Acer OrbiCam by Logitech (www.logitech.com). Description: LVPrcSrv.exe is not essential for Windows and will often cause problems. The LVPrcSrv.exe file is located in a subfolder of "C:\Program Files\Common Files". Known file sizes on Windows 10/8/7/XP are 81,920 bytes (32% of all occurrences), 86,016 bytes and 13 more variants. The program has no visible window. It is not a Windows core file. It can change the behavior of other programs or manipulate other programs. LVPrcSrv.exe is able to monitor applications and manipulate other programs. Therefore the technical security rating is 47% dangerous, however you should also read the user reviews. Uninstalling this variant: In the event of any problems with LVPrcSrv.exe, you can also do the following: 1) uninstall Logitech QuickCam or Logitech Webcam Software software via Windows Control Panel/Add or Remove Programs (Windows XP) or Programs and Features (Windows 10/8/7) 2) ask Customer Support to assist you 3) find out if there is a newer version available.

check the name of the file. right click on the file with your mouse and check the file name. sometimes the name will be the problem. if its something like videoname.TMP rename the file to videoname.MOV or videoname.AVI.

be sure to make a backup of the file before you make any changes.

good luck hope this solves your problem. if it doesn't work feel free to pm me

Here is a program you can do it with: http://dw.com.com/redir?edId=3&siteId=4&oId=3000-13633_4-10671720&ontId=13633_4&spi=5436a0c26f2b4d663a5f027444783331&lop=link&tag=tdw_dltext<ype=dl_dlnow&pid=11043178&mfgId=6287274&merId=6287274&pguid=3tYpkAoOYI4AAFKg74oAAABK&destUrl=http%3A%2F%2Fdownload.cnet.com%2F3001-13633_4-10671720.html%3Fspi%3D5436a0c26f2b4d663a5f027444783331

dsdfsdfdsf

it is saying you need service pack 2 for windows xp, i would think,....it is a number of updates to winxp opereting system for it to perform better .
(he says smiling), if you have the original windows xp disc with service pack two on it ,put it in the cd/dvd drive and press enter when it asks for it.

good luck
Terryu

To help you install the webcam drivers for Logitech, please find the link given below and follow step-by-step instructions appearing on screen. To make you understand, your Logitech webcam shows the model number as mentioned on the website is Quickcam-Pro-5000 (V-UAX16). So select the Windows Operating System that is installed in your computer. http://support.logitech.com/en_in/product/quickcam-pro-5000 GuruAid.com

Simple answer. You can't. Logitech doesn't have this functionality in their software. A huge oversight if you ask me.

unfortunatly there is not "windows 7 " driver for this model logitech if there where windows 7 will have it when you ran updates so there for you have to use windows vista drivers with your fingers crossed,

thanks hope this helps please do rate it anyhow Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620