20 Most Recent Logitech Webcam - Page 8 Questions & Answers

My Logitech webcam software was going back and forth from a normal working state to a non-responding state. After trying reinstalling the drivers and such it was still doing the same thing. I found that if I took the photos out of the default folder location and put them into a different folder, it would remove them from the queue (bottom area of the program where the last photos taken are kept). Now the program works the way it should. I think the program worked well until about 8 or 9 photos were in the queue. This is the solution that works for me. I just need to cut and past every once and a while.

Get software from Skype, AOL, or even Microsoft's Windows Live Messenger to do video calls to other people.

The device has an twistable area on focus lense for adjusting contrust, zoom ins and outs. Attempt to reestablish snapshot clarity by twisting the camera snapshot lense area. Also, wen cameras require least motion with the objects during snapshots. Let the computer stay still to acquire auto tunning before snap shots are taken on web camera. Good luck

You can adjust the focus by turning the lens to the right or the left.

Don't forget to rate this answer if it helps

Try
http://en.kioskea.net/download/download-928-driver-logitech-camera

Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone or Headset.
Click OK and it should work.

Then to use it on the Web, do this.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

Can you get to the sound properties and make sure the proper "recording device" is selected.
Try right clicking your speaker in the system tray, if not the control panel should get you to them.
Let me know if you have any luck
also the mic should always be muted in the sound properties.
But and (I'm not positive on this) usually not muted in the program.
can you get the mic to work at all ?
to test go to from the start button "all programs" / "accessories" / "sound recorder"


Post your answers as a comment or reply and I'll be notified

There should be a focus on the webcam. Try turning the lens of the webcam or look for something on it that turns.

Here is website for driver software for your webcam
http://www.logitech.com/en-us/435/3780?osid=13
hope this works out for you. if you still have problem with that please relay me thanks

See section A. Skype in the info below to setup the Audio & Video.
Also send this to your family and friends so they have their computer setup properly.

Web Camera's have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype

http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/

set it up as follows:
Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
Then click on the Video Settings.
The camera, if Installed Properly, it will come up and show a video picture.
Then, on the bottom of the page click save.
The camera and audio should function properly. Your friends and Family will now be able to see and hear you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger

http://www.soft32.com/download_30.HTML

set it up as follows:
Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and (in blue writing) click on "Open the call setup assistant" and follow the instructions on the left window.

C. Windows Live Messenger:

http://download.live.com/Messenger

After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
Then on the Windows Live messenger window on the right side, click on " "Show Menus." And then click on "Show the Menu Bar".
Next go to the Menu Bar on right side, click on " "Action."
Go to "TOOLS" and click "Audio and Video Setting" and follow the instructions.
NOTE: Your audio and video should work. Enjoy.
When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.

D. AIM (AOL) Messenger:

http://dashboard.aim.com/aim

On the VIM sign-in window click on Edit.
Then click on Settings Enhanced IM.
Next click on Enhanced IM.
Then click on Audio Video.
The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.
Additional information to use with VIM settings.
Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently
Participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM
Conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working
Properly. Follow the on-screen prompts.
Notes:
The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button.
The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly.
Follow the on-screen prompts.
images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the
Picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends.
Hope this helps. Bud

I would close down those applications, if they are being run in start up and you run any flavor of windows (XP or above) then under Control Panel>Adminstrative Tools>Services you can find the service that starts the application and stop the service, so it only runs when you specifically open the application

If you write me English I will try to solve your problem.

Best bet is to go to the Logitech website click on Product Support and type in your web cam model number in and you should be able to find the software

i have logiq notebook and the webcam is not working,what do i need to do?

Did you try uninstalling your Skype? Maybe your Skype version is an old one (recently they launched the new version). Also, if you Skype tried to update automatically and was interrupted it can cause issues.
My suggestion is to uninstall your Skype using Revo Uninstaller, then go to official Skype website and download the latest version which you will install. They try if it works.
Other thing that might be causing the problem is your camera. Please, go to your Skype now, choose tools>options>video settings and see if Skype recognizes your cam (it will appear in drop down window). If your cam is not listed let me know to find you a solution, but first try uninstalling Skype.
I would also like you to tell me the error message you get.

My first suggestion is going to the manufacture's website and checking to see you have the latest drivers downloaded and installed on your system, if that doesn't fix the problem, check to see if there are any patches out for that particular model. If all else fails contact the manufacturer directly!

Switch On your PC/ Laptop and log in to windows. Go to 'Start'--->Programs--->Accessories--->System Tools--->Click 'System Restore'

A 'System Restore' window will appear. Here you will have to check "Restore computer to an earlier time' and click Next

Now you will find one Month Calendar window with Dates below, go to the previous month by clicking the '<' sign in the upper left hand corner of the Month Calendar and select any date that you see in Bold.

Note: It is better if you could remember from which date you are facing the issue, try to select a date prior to that date.

The detail of that particular date should show "System Checkpoint" and time on the right hand side box. Select that date.

Now, Click on Next and System Restore will start and windows will take a reboot. After reboot your problem should be resolved.