20 Most Recent
Numark TT1510 Turntable - Page 5 Questions & Answers
What programs or software can i use for the numark
you can use any type of software such as VDJ Traktor or Serato as long as you have timecoded vinyl and a external sound card like scratch live of the maya 44usb or native instruments 2 4 8 10 will work .
I didnt see the power
Open the tt up and look for burnt components first...check the fuses, the transformers, and the rectifier diodes. It may be possible that only these components are the only ones that smoked(if you are lucky). As for warranty, most companies would assess this as abuse and wouldn;t cover it as a warranty repair. Now I don't know if you know how to use a multimeter, but if you can obtain one, you will need to set it to a low resistance setting to check the above mentioned components. Some meters have a diode check function that looks like an arrow pointing to a line. Use this setting if it is available. When checking diodes the meter should show nothing in one direction and anywhere from 500-700 in the other direction.
IDJ3 - left turntable is
i have the exact same problem but its my right.. its been out of the box for half an hour.. EVERYTHING works.. when i touch the platter it grabs the song.. but when i move it.. it dosnt scratch.. just like trying to correct the beat on the song.. by pushing the edge.. it dosnt do anything.. if anyone has any idea's can you email me at
[email protected]
Audiosonic CR-06PL not changing time when following manual instructions.
Set Time Hours and Minutes: Press Time/12/24 and Alarm1/ON/OFF buttons at the same time for two seconds and it will start to blink the hour.
Press and hold the button for a fast setting or tap it briefly to increase the setting by one hour. Now set the minutes with time (press and hold) and min.
How do I set the Audiosonic clock? Set current time Press and hold the time button and simultaneously press the hour to set the hours in 24-hour mode .
Not finding what you are looking for?