20 Most Recent
LG LMV1630ST Microwave Oven - Page 5 Questions & Answers
Hello. The touch panel does not work, only clock.
OK, you will need to replace the entire controller assembly(key pad). this assembly that is in your unit at this time is damaged and, replacing it with a new assembly, will restore normal key pad functions. You can order a new assembly by clicking the link below or, you can call for service if you are not interested in disassembling this unit. professional service techs are recommended.
CLICK TO ORDER YOUR NEEDED PART.
Some of the key pad won't work!
The keypad may be
damaged or worn out, or control unit may be damaged.
Is it possible that some
spray cleaner accidentally got into the controls?
Direct spraying of
cleaners on the keypad can damage the controls.
I always recommend that you spray non-ammonia
cleaner on a
soft cloth (not a paper towel which can scratch) and gently wipe the
keypad.
If it is wet and does not dry out
over time, it may need to be manually dried or blown out.
We have
the service / repair manual for this model and have uploaded it to our
site here to help you.It will give you safety info, step by step help in disassembly, troubleshooting tips, and part numbers.
You will need the free
Acrobat Reader
to view or print it in case you don't have it already.
If you have a failed membrane keypad (which I suspect) the quickest and easiest way to repair it is to replace the plastic control panel frame which keypad as an assembly.
It is part # 478181A001A "Controller Assembly,sub" which runs $44.13 plus shipping
Encompass or you can call them toll-free at 866-779-5835.In this case, you simply move your circuit board into the new frame.We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.
Replacement Handle?
Yes they will, unless it very old. For Goldstar / LG / L.G. help, call 1-800-243-0000 (M-F, 7am-8pm CT, Sat 8-5 CT) and choose the appropriate prompt from the menu or visit
http://www.lgservice.com.
We're happy to help and we appreciate your thoughtful rating of our answer.
My new LG solardome MA3884vc overheats melamine plate @30 seconds
If your LG Solardome microwave oven is overheating a melamine plate within 30 seconds, there could be a few potential issues at play:
- Power Settings: Check to see if the power settings on your microwave are too high. If it's set to a high power level, it can cause certain materials, like melamine, to overheat quickly. Try reducing the power level and see if that helps.
- Plate Material: Melamine plates are not suitable for use in microwave ovens as they can overheat and potentially release harmful chemicals into your food. It's recommended to use microwave-safe dishes made of glass, ceramic, or microwave-safe plastic.
- Microwave Performance: If the microwave is consistently overheating items within such a short time frame, it might indicate a malfunction. In this case, it's best to contact LG customer support or a certified technician to inspect and repair the microwave.
- Placement and Usage: Ensure that the plate is placed centrally on the turntable and not touching the sides of the microwave. Also, avoid using the microwave for extended periods without interruption, as this can cause overheating.
- Testing with Different Materials: Try using a microwave-safe ceramic or glass plate to see if the issue persists. If other materials heat up quickly as well, it could indicate a problem with the microwave itself.
How to remove door COVER from door of LG Microwave model LMHM2017ST
Here are the steps to remove the door cover from the door of your LG Microwave model LMHM2017ST:
- Unplug the microwave from the power source.
- Open the microwave door and locate the four screws on the inner edge of the door.
- Use a Phillips screwdriver to remove the four screws.
- Carefully separate the outer door panel from the inner door panel.
- You will now see the door cover attached to the outer door panel.
- Use a flathead screwdriver or plastic pry tool to gently pry the door cover off of the outer door panel. Start at one corner and work your way around the edge.
- Once the door cover is removed, you can replace it with the brushed silver cover from the new door.
- To reassemble the door, simply snap the new cover onto the outer door panel and then reattach the outer door panel to the inner door panel using the four screws you removed earlier.
Make sure to be careful when removing the door cover, as it can be fragile and may break if handled roughly.
LG microwave door open pad broke.
Question edited for clarity.
Question moved from Building Materials to LG Microwave.
Take into an LG Service centre for repair. They are sealed by security screws and are dangerous inside. You won't be able to get parts.. If it is a counter top microwave and cost $60, just buy a new one as they are a disposable item.
Not finding what you are looking for?