Top 10 Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Questions & Answers

I DO HAVE THE CD BUT CAN NOT READ THE PIN ON BACK OF ROUTER I WAS GIVEN THE ADRESS #168..2.1 PLEASE HELP

LYNDA

Do You have a problem with your Belkin Product? are you looking for Belkin Customer Support to Help you Troubleshoot your Belkin device? No Issues, We are going to Help you get the Belkin tech support in easiest way Possible. visit here : https://wirelessrouterexpert.com/customer-support/contact-belkin-customer-service

you have to unplug your cable modem before you connect the router. after you have connected the router you plug the power back on the cable modem then the router and you should be able to browse the net

Hi, Here is your solution.
Please ensure the proper physical connection from modem to router and to the computer as mentioned on the box and make your all lights are on modem.After that turn on the router,if your have a cable modem, you can very well go for a hard reset,that it is at the back of your router you would see a reset button which is a button inside a hole. Please hold the button for 20 secs with power on router and 20 seconds without power continuously for 3mins (remember to hold the reset button through out 3 mins while plugin and plugout the power cord of the router and use pin or pen to hold the button). After this check out the lights on your router, lan light, internet ,power and modem should be solid.Else you can call the customer service number on the product box, they will assit you very well,ITS A TOLL FREE NUMBER.

1 800 2BELKIN x2263

You can always press the reset button and wipe all settings out. You will have to re-enter passwords and encryption to protect your network.

here is how you set up port forwarding:

1. log into the router;
2. Click the Applications & Gaming link near the top of the page. 3. You should now see a new menu. Click Single Port Forwarding or Port Range Forwarding.
4, Enter sth like: HTTP; 80; 80; TCP; 192.168.0.1; check
5. When you're finished, click Save Settings near the bottom of the screen to save your changes.

go to administration-> remote administration to set up remote management
Remember, remote Administrator requires you to forward the 4899 ports.

i want install a router

The router adress is 192.168.2.1. For this particular model there is no username or password. This is Belkin default...

Jeff

follow the steps below:

1. Connect a computer to any one of the four LAN ports of the Belkin wireless router.
2. Open your web browser and type the router IP address of the router (by default, the address is http://192.168.2.1.) in the address bar and press Enter.
3. Click Login on the top of the page to login to the router. By default the Password is left blank, click Submit.
4. Click Security under Wireless menu.
5. Under Security, you can select 64 bit WEP (or 128 bit WEP) or WPA/WPA2-personal (PSK). Note: make sure that your wireless computers will be able to support WPA encryption since not all wireless cards/adapters will be able to. if you're not sure, WEP is the encryption to use