Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) - Page 3 - Answered Questions & Fixed issues

if you forgot the password you can reset the router back to default settings.hold the reset button in with a paper clip for 30 seconds powered on.then try and login using a browser to 192.168.2.1 the default password is blank.reconfigure the router to your settings.

DNS server not found is easy to fix, I have helped many people with this problem. Contact the people you get your internet from. tell them you need to register your xbox. That should solve your DNS problem. and for more info contact http://tinyurl.com/m7ghqz

In a basic home configuration your not going to have two subnets. When you plug in a device for the first time you should get a class C private address. The first three parts of the x.x.x.x address are your network address the last x is your host address. So your Gateway address (the router) will be like 192.168.1.1, so it's host address is 1. All other devices will by default be given an address from the router in an address pool like from 192.168.1.50 - 192.168.1.100 these are given out via DHCP. You can give devices statically assigned IPs but there shouldn't be any need unless you have servers which in that case should be static. If you try and give a device an address of 192.168.2.x this is considered a different subnet and won't be able to talk to anything on the 192.168.1.x subnet without extra configuration nor would the router forward the packets out to the internet. So long story short keep all your devices either DHCP or configure the static IPs on the same 192.168.1.x subnet.

Please check the following 2 links:

First is the support link

http://www.belkin.com/support/article/?lid=en&pid=F5D9230-4&aid=9082&scid=222

Second link is to download the driver:
http://www.belkin.com/support/article/?lid=en&pid=f5d9230-4&aid=9082&scid=222&fid=3769&fn=f5d9230v3100ezi.exe

Thanks and regards
Telehelp

Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Connect a LAN cable from Belkin to yourlaptop/computer's LAN port, open a browser on your laptop/computer and enterthe Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless security settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

just type the word hotmail.com in the search bar then type your password

You don't really need the CD to setup a router but it does make it easier for non technical users.

##### DISCLAIMER ######
My solutions are generalized solutions and the actual solution may deviate slightly from what is actually posted in this solution. If you are unable to complete a step PLEASE COMMENT WITH THE EXACT MAKE/MODEL AND I WILL POST THE SPECIFIC STEPS (if you already have provided the make/model just comment what step you need more help with).
##### END DISCLAIMER #####

First obtain your IP Info

GETTING YOUR IP INFORMATION
*** Info presented in [] will distinguish between a windows XP step and a Vista/7 step. A bracketed step will be in the format [WinXP Step/Win Vista/7 step] ***

1. Click on the [Start/Windows] button.
2. [Click Run/Go to next step]
3. Type cmd
4. In the command prompt type "ipconfig " minus the quotes.
5. Write down the ip address and default gateway address. They will be in the format ***.***.***.***

Now time to configure the router

1. Plug in a en ethernet cable(looks like a extra wide phone cable) into the computer you want to configure the router with.
2. Plug the other end into one of the numbered ports on the router.
3. Open a web browser and enter the default gateway address and hit enter.
4. If prompted for username and password try one of the four combos (username/password) admin/ , admin/admin , /admin and both blank.
5. Once logged in you will want to change the username and password this is generally under the "basic" or "general tab" and rename your wireless SSID
6. Only other thing you should setup is the wireless security this is generally under a tab called "security" or "wireless security"
7. Step the encryption to WPA2 PSK. Make sure to make the password with Upper & lower case letters, numbers and special characters. It's ok to write it down.

Now connect to the network you named and enter the WPA2 password and your done.

Comment if you need additional assistance.

Did you configure the router, to select:

1. SSID, the "name" of your network;
2. encryption-level. Hint: use 'WPA' or 'WPA2'.
3. password to your network.

If so, then enter the SSID/password on the iPad, to connect to your network.

Hold down the "reset" button on the back for 10 seconds while the router is on. This will clear the password. Please note this will also erase all your router settings and restore them to factory defaults.

Yes, You can. But only with 32bit version.

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless ->wireless security and note down the password.Let me know if you need further assistance. Thanks for using FixYa.

you need to enter on the admistrator of your router to reconfigure it or to activate the security.just connect to router then go to iexplorer and type the ip of your router.the ip of your router is the default gateway of your computer ip.

What you want to do is click on the keyboard the windows key and R at the same time. Then type cmd in the box and hit enter. Then type in ipconfig and hit enter. Then when it says default gateway, open up internet explorer and type those numbers in. You will need a username and password probably something like admin and admin, it may tell you what it is. Then you want to go to Wireless settings and go to security settings. You can then change the key type to WPA and input your security key. You will then need to put that key into your computer so you are able to access the network.

Thanks for using FixYa!

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

There are many network-related settings that need to be configured on the system for connecting to a wireless network. If even one of these settings have not been configured properly, issues will come up. All users facing problems with the use of wireless networks are advised to check network-related settings such as access points, IP address in use and reconfigure them if they are not properly set. Users are also suggested to check the firewall settings to make sure that the firewall is not blocking network connections.
http://router.iyogi.com/wireless-network/wireless-network-not-working.html
http://www.informationweek.com/news/mobility/802.11x/216403550

heres how; http://en-us-support.belkin.com/app/answers/detail/a_id/3774/related/1/session/L2F2LzEvdGltZS8xMzA5ODU1NTc5L3NpZC84a1NuZ2N5aw%3D%3D

Find your Belkin router by model # on this link and follow the steps:

http://portforward.com/english/routers/port_forwarding/routerindex.htm I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Connect a LAN cable from Belkin to yourlaptop/computer's LAN port, open a browser on your laptop/computer and enterthe Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

You need to RESET router press RESET / WPS button for 10 seconds then all settings defaults . You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. then connect cable from your internet provider to WAN port of router. Let me know if you need further assistance. Thanks for using FixYa.