20 Most Recent Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) - Page 5 Questions & Answers


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Belkin Wireless... | Answered on Jul 09, 2011


There are many network-related settings that need to be configured on the system for connecting to a wireless network. If even one of these settings have not been configured properly, issues will come up. All users facing problems with the use of wireless networks are advised to check network-related settings such as access points, IP address in use and reconfigure them if they are not properly set. Users are also suggested to check the firewall settings to make sure that the firewall is not blocking network connections.
http://router.iyogi.com/wireless-network/wireless-network-not-working.html
http://www.informationweek.com/news/mobility/802.11x/216403550

Belkin Wireless... | Answered on Jul 08, 2011


Find your Belkin router by model # on this link and follow the steps:

http://portforward.com/english/routers/port_forwarding/routerindex.htm

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Belkin Wireless... | Answered on Jun 29, 2011


Connect a LAN cable from Belkin to yourlaptop/computer's LAN port, open a browser on your laptop/computer and enterthe Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- https://www.fixya.com/support/r3559128-wireless_router_security

Belkin Wireless... | Answered on Jun 27, 2011


You need to RESET router press RESET / WPS button for 10 seconds then all settings defaults . You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. then connect cable from your internet provider to WAN port of router. Let me know if you need further assistance. Thanks for using FixYa.

Belkin Wireless... | Answered on Jun 25, 2011


by default the Belkin does not have an admin password- if you are locked out, locate the recessed reset button on the router, and hold it in for about a minute- this would reset the router to its default configuration and security

I’m happy to help further over the phone at https://www.6ya.com/expert/susan_42b401e0b1603d8a

Belkin Wireless... | Answered on Jun 24, 2011


You need to reset your router to defaults. You can also configure it with below method.
Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Belkin Wireless... | Answered on Jun 19, 2011


Make sure you choose the right protection.

WPA
WPA Personal

WEP

etc.
etc.

Belkin Wireless... | Answered on Jun 11, 2011


1. Click on "Start" in Windows XP. Go to "Run", and type "CMD" (without the quotes.) Click on "Start" in Windows Vista or 7. Type "CMD" (without the quotes) in the "Search" box.

2. Press your "Enter" key and you will be at the Command Prompt. Copy and paste the following command into your prompt:
Ipconfig /all

3. Press the "Enter" key to execute the command.


4. Look through the list of names until you see either "Default Gateway or IPV4 Gateway" and write down the numbers next those names. The numbers will look similar to 192.168.x.x

5. Open Internet Explorer and erase your homepage address from the address bar. Type in the Gateway IP address you wrote down, and press "Enter". This will bring you to your router configuration page.


6. Enter your router password. If you do not know the password, open a second Internet Explorer window and search for the default password for your router.

7. Click on the "Administration" link on your router, look for a setting called "UPnP" and change it from "Disabled" to "Enabled".


8. Click the "Save Settings" or "Save Changes" button at the bottom of the page. Exit your router configuration and you will have an open NAT.

Sorry dont have a Belkin router with me but this should be explicit enough for you to be able to look for the UPnP and do what i said.. If possible send me a screenshot of the Router interface i will help you more with it if you cant..

Belkin Wireless... | Answered on Jun 01, 2011


Hi,

Welcome to Fixya. The security key can be found when you access the wireless settings page of the router. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.2.1, the Default password isblank.


Click on Security under Wireless and look for the Security Key or Network Key (Passphrase)


If you have questions please let me know. Thanks for using Fixya

Belkin Wireless... | Answered on May 23, 2011


Connect a LAN cable from Belkin to your laptop/computer'sLAN port, open a browser on your laptop/computer and enter the Belkin'sconfiguration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- https://www.fixya.com/support/r3559128-wireless_router_security

Belkin Wireless... | Answered on May 23, 2011


If there has been a password already set that you don't know you will need to reset to factory defaults. If there isn't one look here: http://portforward.com/default_username_password/Belkin.htm and find your router and try the default username and password. If you do end up resetting to factory defaults then look at the link above and use the default username and password to get into your router.

Belkin Wireless... | Answered on May 18, 2011


Assuming you have the administrator password, you can find the key by logging into the router by:

1. open you web browser

2. navigate to 192.168.2.1

3. login with your admin password

4. Click "security" along the left margin under "wireless"


If you do not have your admin password you can find the reset button on the back of the router. You will need to push this in with a small object (like a paper clip or a pen) for 10 seconds. This will restore the router to factory defaults. You then must login to the router (descibed above) and reconfigure all settings. Thank you for choosing fixya.com

Belkin Wireless... | Answered on May 16, 2011


click here to know how to find or create or change the password of your belkin router.


My entire list of useful tips... click here

For any further assistance comment here...

Belkin Wireless... | Answered on May 14, 2011


Dear user,

Looks like you are loosing the link , please try to move towards the Wireless transmitting device where it is installed. it will increase the signal strength, if you cant move away, keep your laptop such that its not blocked by cupboards, walls or any big objects

Belkin Wireless... | Answered on May 07, 2011


You can also configure it with below method.
You can configure it without disk with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then click on WAN settings set it as your internet service provider settings enable DHCP Then click on wireless and enable it. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Belkin Wireless... | Answered on Apr 30, 2011


1. network security is setup by the user
You either have it or you will need to go through the set and establish a new network security key again via the CD that came with the router device.

Belkin Wireless... | Answered on Apr 15, 2011


you need to setup your xbox 360 with a static ip address
after that login to your belkin router
and click on virtual server on the left.
then add the following ports 53,80,88,1863,3074.

Belkin Wireless... | Answered on Apr 11, 2011

Not finding what you are looking for?
Belkin Wireless G Plus MIMO (F5D9230-4) Router (1010835) Logo

1,187 questions posted

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Jeffrey Groves
Jeffrey Groves

Level 3 Expert

573 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Belkin Computers & Internet

  • Belkin Computers & Internet

Most Popular Question

install belkin router without setup cd

  • Computers & Internet
Loading...