20 Most Recent Kyocera CS-2550 Black and White Copier - Page 2 Questions & Answers


check drum unit contacts if ok. remove the cylinder and cleaning blade and replace on the old unit

Kyocera CS-2550... | Answered on Sep 16, 2010


go to printer properties, printing preferences and set the paper size to A4 or the size you are sending

Kyocera CS-2550... | Answered on Sep 10, 2010


Is the email and scanning already set up? The reason I ask because if they are not set up (either one) it can be quite in depth.
Also is it networked or hooked up USB?

Kyocera CS-2550... | Answered on Aug 26, 2010


  1. First you need the driver. Use this one for the 32bitthis one for the 64bit systems.
  2. Attach your computer to the printer. this can be done different ways depending on the options you've installed in the copier. Parallel cable, USB cable, or via the LAN using an IP.
  3. With cable printing you can hook it up, load the driver, and go. With IP printing you will need to add a port and specify the IP of the printer or Jetdirect box.
  4. The wizard will take you through the rest.
NOTE: Copiers don't have the ability to buffer jobs the way printers do, large jobs not managed by the local computer may hang on older copiers. Keep in mind that this may not offer the smooth operation you would get from say an HP Laserjet, etc.

Kyocera CS-2550... | Answered on Jun 09, 2010


it is obvious to me that the problem u have is the printer is not communicating with the computer and i also think the printer is defective and is the source of this loss of communication, as to what is causing this will take a skilled tech to figure out though testing. in the end you may find it cheaper to replace than repair based on current labor rates for this type of diagnosis and repair..

Kyocera CS-2550... | Answered on Jun 04, 2010


my guess is u got the cheap version without the duplex option

Kyocera CS-2550... | Answered on Apr 25, 2010


You will need to download the software and drivers to connect the Kyocera 3060 to your PC. Click on the links below and select your operating system to get started

http://www.kyoceramita.eu/index/service/dlc.false.driver.KM3060._.EN.html

Now download the software at this link
http://www.kyoceramita.eu/index/service/dlc.false.utility.KM3060._.EN.html

Kyocera CS-2550... | Answered on Apr 22, 2010


please check corona wire may be it was broken re-wear it then print ok

Kyocera CS-2550... | Answered on Mar 28, 2010


elle marche pas
elle signale une erreure est afiche code j50
a quoi signifi code j50


Kyocera CS-2550... | Answered on Feb 23, 2010


IF it says downloading program it sounds like it is trying to update the firmware. Did someone stick a compact flash card in the CF card slot. If so removed the CF card and reboot the machine.

Kyocera CS-2550... | Answered on Feb 18, 2010


clean the DF tires with a mild soap/warm water solution. This will generally take care of most issues unless the feed tires are too worn, in which case you will have to replace them.

Kyocera CS-2550... | Answered on Oct 14, 2009


Use this method:

[File]
[Print]
Select the printer from the list and click on [Properties]
Change the "Original siae" to "11x17"
Change the Output size from "Same..." to "8.5x11" or "8.5x14"
[OK]
[OK]

Kyocera CS-2550... | Answered on Sep 29, 2009


1. Press the System Menu/Counter key.
2. Press the UP key or the DOWN key to select Machine default.
3. Press the Enter key.
4. Use the numeric keys to input 2500
5. Scroll down to "Sleep Mode Time" and use the arrow keys to set from 1 to 240 minutes. then press the ENTER key.
6. Scroll down to "Low Power Time" and use the arrow keys to set from 1 to 240 minutes, then press the ENTER key.
7. Back out of the menu and your done!
I setup ALL our machines to 240 minutes. This means if you don't use the machine in 4 hours, it shuts itself off.

Kyocera CS-2550... | Answered on Aug 26, 2009


Check the PC that you are trying to scan to amd make sure that the Scanner File Utility is up and running. You can check this by looking for the scanner icon in the bottom right corner, if it's not there click on start, all programs, scanner user software, scanner file utility, click on Scanner Utility to bring it back up, it just might have gotten closed accidently. If none of this works go into the control panel and click on firewall amd make sure file and printer sharing is checked, if it is you may have to turn Windows Firewall off to make the Scanner work.

Kyocera CS-2550... | Answered on Aug 21, 2009


Make sure that the scanner file utility is running on the computer you are scanning to. Go to Start - Programs - Scanner User Software - Scanner File Utility. It will open in the system tray by the clock on the PC. Try to scan again. If still have the same error, go to the webpage of the scanner (just enter the IP address of the scanner NIC in Internet Explorer. Go to the bottom left side of the page and click Scan to PC Destination List. Click on the number to the left of the name you are scanning to. check the IP address listed on the webpage and make sure it matches the IP address of the Computer you are scanning to. One of these should fix it.

Please remember to rate you answers.

Kyocera CS-2550... | Answered on Jul 15, 2009


This could be something as simple as out of paper to the wrong IP address or a configuration problem. Check the printer driver for the way it is connected. LPT port, USB or Ethernet.

Kyocera CS-2550... | Answered on Jul 07, 2009


can't print on something that small

Kyocera CS-2550... | Answered on Jun 04, 2009


The Save number and the Registration Number must match, folder # will be same as save and registration number.

Kyocera CS-2550... | Answered on Jul 10, 2008


Make sure document feeder cable screws are tight and if cable guard (metal bracket) is not installed make sure it is not too close to the wall.

Kyocera CS-2550... | Answered on Jun 25, 2008


reload your driver that came with the printer,be sure to go to properties and select shared.Although the print and scan functions use the same network cable they have diferent IP addresses and the driver software assighs the IP for scan funtion.

Kyocera CS-2550... | Answered on Mar 04, 2008

Not finding what you are looking for?
Kyocera CS-2550 Black and White Copier Logo

57 questions posted

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kyocera Office Equipment & Supplies

  • Kyocera Office Equipment & Supplies

Most Popular Question

kyocera km 2050

  • Office Equipment & Supplies
Loading...