20 Most Recent E-Machines T5082 PC Desktop Questions & Answers

Hi,
You probably need to update the codecs on the machine, get K-Lite codec pack here, download and install it >>>>>>>>



http://register.sonicdownloads.net/download/index.aspx?sx=a4eb1f90-9cda-4116-8072-e072f715e068



Good luck

you can use windows to burn disc but this is for DATA only by click and drag

or you can download some free application software to burn in cd/dvd

here are some free software you can download and use. copy the link to your browser to download.

CD BURNER XP
http://cdburnerxp.se/en/download

ASHAMPOO BURNING STUDIO
http://download.cnet.com/Ashampoo-Burning-Studio-Free/3000-2646_4-10776287.html

BURN4FREE
http://www.burn4free.com/download-dvd-copy-software.htm

There are 3 step to repair 80200279 error

If you got 80200279 error then there is a 94% chance that your computer has registry problems. To repair 80200279 error you need to follow the steps below:

* Step 1 - Download a Perfect Optimizer,install this error repair tool.
* Step 2 - Click the Repair All Button.It will scan you pc for Free.
* Step 3 - Then click the Repair All Button again and your done! It is very easy to repair 80200279 error.

Here are the url of Perfect Optimizer:http://www.fixerrordiy.com/ttfix-8020027… Source(s): http://www.fixerrordiy.com/ttfix-8020027…

change your motherboard.

you have to use either slots as not the same memory slots

E-Machines eMachines Desktop PC Sd card reader ... - Fixya

www.fixya.com > ... > E-Machines > E-Machines eMachines Desktop PC SD card in the 9 in 1 card reader, but it does not read. please check the SD Card ...SD card readers aren't capable of reading SDHC cards, even though the card will physically fit into the card reader slot. ... E-Machines T5082 PC Desktop.

You must find "eMachine" XP USB drivers for your computer.
If all USB support is "enabled" in BIOS, the conflict is with drivers.
XP is loaded with many generic drivers, however eMachines is proprietary and requires eMachine drivers for most on-board hardware.

Contact eMachines support to locate the drivers (if available).

Thanks for using FixYa - a FixYa rating is appreciated!

You're probably missing a driver for it. Download it off the website for which ever mouse you're using and see if that works. If not try to see if your USB ports will read anything else. Like a flashdrive or get a USB keyboard and test them, assuming you're using a USB mouse.

That Machine would take DDR2 PC2-5300 upgrade chips. The max that system could take would be two 1GB sticks for a total of 2GB or 2048MB of memory. Memory is fairly easy to damage with static discharge and is also very easy to not put in all the way. When putting it in, unplug the power from the computer, push and hold the power button for 20-30 seconds to help discharge power from the computer, Line up the pins on the memory and push them into place till the little arms at the sides of the slot pop up and click into place. I'd install one chip at a time, powering the machine up after the first chip to make sure it works, then starting over again. The only time I'd install both chips at the same time would be when installing a memory kit (two or more chips in one package), in which case, install both chips before powering it on.

Make sure the output of the desktop is Bluetooth. Control panel/Sound

It sounds like you have the incorrect replacement. You do not want any space between heatsink and CPU.

Will the fan off it swap with your original?

Don't forget themal paste either.

Yes sir.The eMachines T5082 Desktop PC uses an Intel D102GGC2 motherboard,http://www.newegg.com/Product/Product.aspx?Item=N82E16813121031The motherboard chipset is an ATI Radeon Express 200,http://en.wikipedia.org/wiki/Comparison_of_ATI_Chipsets#Comparison_of_Northbridges_2Scroll down the chart under the - Model - heading.ATI Radeon Xpress 200 for Intel.Processors Supported;Intel Pentium 4, Intel Core2If the motherboard chipset will support an Intel Core 2 Duo CPU, it will support an Intel Pentium D.Plus you can always go to Intel Support, and look, lol!http://www.intel.com/support/motherboards/desktop/d102ggc2/sb/CS-026580.htmhttp://en.wikipedia.org/wiki/List_of_Intel_Pentium_D_microprocessors#.22Presler.22_.2865_nm.29So what are we talkin' about?A Intel Pentium D, model 925 or model 930?Up To a maximum frequency rate ('Speed'), of 3.0GigaHertzL2 cache of 2 x 2MegaByte (2MB)800MegaHertz Front Side Bus. (800MHz FSB)FOLLOW Anti-Static Procedures.THOROUGHLY clean the top of the Processor, and bottom of the Heatsink.Properly apply fresh, new Thermal Paste.http://www.hardwaresecrets.com/article/274For additional questions please post in a Comment.Regards,joecoolvette

Restart your computer repeatedly tapping the f8 key to enter safe mode while the screen is black once in safe mode where the only things working will be your keyboard and mouse allowing you to attempt to repair your computer

Windows Advanced Options Menu

Please select an option:

Safe ModeSafe Mode with NetworkingSafe Mode with Command Prompt

Enable Boot LoggingEnable VGA modeLast Known Good Configuration (your most recent settings that worked)Directory Services Restore Mode (Windows domain controllers only)Debugging Mode

Start Windows NormallyRebootReturn to OS Choices Menu

Use the up and down arrow keys to move the highlight to your choice

select safe mode with command prompt

Click start run type cmd press Enter

black screen should open DOS mode

this will vary depending on your operating system

type in net user username

For eg. If you want to change administrator password , type net user Administrator

it will prompt you to enter the new password

enter the new password and the password is changed

if this fails you will need to

Select safe mode with networking to download

you could download all of these or just one save them to a usb drive for later use if one fails to remove the password

Windows Password Recovery Basic

http://majorgeeks.com/CmosPwd_d239.html

A CMOS BIOS password recovery tool

Editors note: This tool should only be used by experienced computer users. Please see the enclosed read me if you would like to run it from Windows. Failure to follow instructions (from Windows) will cause your anti-virus to flag this as a virus.

http://majorgeeks.com/Dr._Freeware_System_Utilities_d6416.html Dr.Freeware System Utilities which includes data recovery software, data backup, password reset tools for Windows helps you to maintain your system. Dr.Freeware is freeware, you can download and use it for free.

hope this helps

The eMachines T3516 uses an Intel D101GGC motherboard,http://www.ascendtech.us/intel-d101ggc-lga775-800fsb-motherboard_i_mb4intd101ggc.aspxTwo Ram Memory slots.Maximum Amount for EACH ram memory slot is 1GB.Maximum TOTAL Amount for the motherboard is 2GB.Ram Memory used is DDR Sdram at 333MegaHertz, or 400MHz.That is PC-2700 and PC-3200 respectively.Uses Non-ECC, low density, Unbuffered, CAS Latency of 2.5, and 2.5 Volt.Regards,joecoolvette

Open PC up and re-seat if not integrated with mother board. But yes, easily replaceable even if yours is integrated. Simply pop a new one into expansion slot. Check slots before you purchase one.

have you tried to install the drivers that came with the monitor? if not you can go here: http://imogenstudio.com/node/73 If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Link to emachines support page were your drivers are located.http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=1620

I'm a bit confused....did you have all four of these in the ACER and are trying to put the 2x1GB into the Emachine? And that the 2x1 GB wouldn't work in the Emachine but they did in the ACER and that the 2x512 Acer cards worked in the emachine?If that is what happened here is my best guess. The ACER MOBO will support 533/667/800 MHZ DDR2 RAM. The Emachine will only support 533 RAM. Iys possible the 2x1GB are either 667 or 800 MHZ and are not compatible with the Emachine but will work in the ACER.