Motorola Mobility H350 Wireless Headset - Answered Questions & Fixed issues

The default Motorola passkey is 0000, try hat now, but be sure to follow the instruction to which you will link you bluetooth headset!!

have fun

0000 Mark Motorola Support

i forgot the code to my motorola h350 headset and wondering if you could give me it

Have you tried deleting and recreating the pairing?

i dont know

go here for your manual

did you try to hold down the power button on your headset until it blinks and then try to sync to the ps3 again. You have to put he headset into sync mode before attempting to put the ps3 into sync mode

There is two way you can do 1) ensure that the charger have output ( use volt meter to check or use handphone to confirm ).2) ensure the bluetooth charge contact is clear for charging ( or use contact cleaner to clear ).if you have done this two and still no charge then the battery in the bluetooth may be dead. hope it help.

Just press the Turn on button for a while, it will be turned off.Android 4.0 Tablet PC

Hi!

If you have paired and connected the headset to your computer, then please do the following:

1. Sign in to Skype and in the TOOLS menu, select OPTIONS...
2. Under AUDIO SETTINGS, select your Bluetooth headset from the MICROPHONE, SPEAKERS and RINGING drop-down list.


Please let me know if it helped.

Best regards

To turn the headset on (when not plugged into power) hold down the big silver button and either the volume up or down key at the same time for at least a couple of seconds.

You will need to pair it up after that. To pair it, you need to hold down one of the volume buttons. In discovery mode, the light will not flash, but will be on. Discover the device and use the passcode 0000. Once done, the light will flash 5 times.

To turn it off, just repeat the turn on procedure

Hope this helps

It is hardcoded to '0000'. Nevertheless, you must put in pairing mode prior to pairing it with your phone. In order to do it, press and hold the call button for some 6 to 10 seconds, until the indicator light is steadily lit (it will flash, as if you were turning it on, but don't release the button, then). Then, within the next couple of minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000'. If the pairing process is successful, your headset should enter the stand-by mode. There could be an indication of a connected device on your phone too.

Hope it works for you. ]
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please let me know if you need further informations.

Regards, Carlos

It is hardcoded to '0000'. Nevertheless, you must put in pairing mode prior to pairing it with your phone. In order to do it, press and hold the call button for some 6 to 10 seconds, until the indicator light is steadily lit (it will flash, as if you were turning it on, but don't release the button, then). Then, within the next couple of minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000'. If the pairing process is successful, your headset should enter the stand-by mode. There could be an indication of a connected device on your phone too.

Hope it works for you.
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please let me know if you need further informations.

Regards, Carlos

In order to pair it with your phone, press and hold the call button for some 6 to 10 seconds, until the indicator light is steadily lit (it will flash, as if you were turning it on, but don't release the button, then). It is in pairing mode now. Then, within the next couple of minutes, make your phone's bluetooth application search for new devices. After a little while, your headset should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '0000'. If the pairing process is successful, your headset should enter the stand-by mode. There could be an indication of a connected device on your phone too.
Hope it works for you.
By the way, if your headset's user guide happens to be missing, feel free to download it from this location.
Anyway, please let me know if you need further informations.

Regards, Carlos

Hi,

The passkey or PIN is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Thanks for using FixYa.

I've successfully paired this headset with Vista but only for Skype. In Control Panel set the Bluetooth discovery and it should pair OK but then you need to run Skype which will find the headset and ask if you want to use it. The solution is a bit temperamental because the microphone volume is usually either low or there is too much background noise.

Hi,

You can download the manual by clicking this link

You'll require Adobe PDF Reader installed on your PC to view this manual. If it is not already installed on your PC, download it free from:

http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa

Password is fixed as 0000. Most headsets are 0000 or 1234.

Generally with these headsets you will need to gently pry open the exterior casing as they are glued together. When you have access to the inside of the headset you can try to realign / replace the spring underneath the button.