20 Most Recent Amana AOCS3040 Electric Single Oven - Page 5 Questions & Answers

Propane? was it a recent install? Gas orifices must be changed and regulator added or removed depending on which fuel is being used, you may need a conversion kit.

LOC often indicates that the control panel has been locked to prevent accidentally turning on (or off) the oven. This is useful when you clean the control panel (or have small children). Look on the appliance for a notation to press and hold a touch pad (or pair of them) to engage the control panel lock. On at least one model, you would press and hold Start for 3+ seconds to toggle the lock on and off. On some models, this could indicate that the oven door is locked for cleaning. If the lock is flashing, then the switch is giving an incorrect door lock status. Check if the door is locked. For this situation, you can try unplugging (or turning off the circuit breaker) for 60 seconds or longer. If the message returns and the door is unlocked, then the lock assembly may need to be replaced. I hope this helps. Please add a comment with the model number of your appliance and indicate if the oven door is locked or not, for more information. Cindy Wells

This sounds crazy but have you unplugged the range from the wall and plugged it back in?

The easiest way would be to throw your circuit breaker, wait 10-15 minutes for good measure, to clear capacitance, then flip the breaker back on. If the display is damaged or dim, get the display board re-built.

You need to change the jets , different gasses have a different size hole in the jet. The manufacture supplies other jets, if the appliance is designed for both gasses. LP (propane) jets have a smaller hole than Natural (Methane) Gas. The pressure of LP gas is higher, to be able to suck in more oxygen.