20 Most Recent
D-Link Xtreme N DWA-652 (DWA652) Wireless Adapter - Page 2 Questions & Answers
How do i change my D-link wifi password
You need to log into the router using either //router, routerlogin.net. or the IP address which is by default, 192.158.1.1 or 192.168.0.1
Default passwords can be found on the companies website, but many use admin and password
D-link router i wanna clear
Hi,
To clear cache manually try the following:
(1) start dos console by going to start > run > type "CMD" and press enter
(2) then type IPCONFIG /FLUSHDNS
If the above doesn't work then try the following THEN do the above step again:
~ Enabling DNS Cache Service ~
• To start the WinXP DNS Cache Service, click START -- RUN -- SERVICES.MSC -- Press ENTER.
• The Services console will appear.
• Navigate down the list of services until you find the one labeled DNS Client.
• Double click on DNS Client to open its properties pane. Set the Startup type to AUTOMATIC.
• Click APPLY and then click START to start this service.
• Retry the above step to manually clear your DNS Cache.
Thanks.
How to get the password of d-link router after reset?
Our technical expert solves more than 500+ issue every day.
we are available in every unapproachable location of USA/Canada. The customer can contact us any time, our technical
staff always ready to solve your all issue.
Therefore if you are facing any kind of issue which is mention
above so don't need to worry about it just Dial our Toll-free
Number
D-Link Support Number USA 1-833-284-3444.
https://servicenumber.org/d-link.html
DIR-857 cannot connect to internet
First check the LAN cable between the devices and try another cable. Reboot both devices.
The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset
If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.
Not finding what you are looking for?