Top 20 Belkin (F5D8231-4) Wireless Router (F5D82314) - Page 4 Questions & Answers

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Hello,

If you try to connect their pc to the wireless you should be prompted to enter the pin number. enter it into their pc also, and it should work. If this doesn't help, please provide more details and I can help more.

Regards,

Joe

Hi there,

This issue is called no sync issue. Which means there is no synchronisation between your computer and the router.

Try Changing the Microfilter
swap the Leds of the cabel which is connected between the router and the computer.
Call your internet service provider if issue is not fixed.

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the Left under wireless Click Security

Step 4 : If it asking for a password leave that blank and click submit

Step 5 : On this Page you can find the WPA Key ( If it is a bunch of dots then Uncheck "OBSCURE PSK ")

Step 6 : IF the security mode is WEP then the key 1 will be your password


Regards
TOM


IF YOU WANT TO CHANGE THE SECURITY

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Belkin : Support

Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Click on wireless then wireless security Enable WEP then enter new password save settings and restart router .Then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

password should be 'admin' by default. with no user name.

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

The security settings ie. encryption is configured in the Belkin wireless settings. You then configured your old wireless card in you computer with these settings so it can connect to the Belkin.
I suggest you also apply these same settings to the wireless cards in your laptops.
To make your wireless network secure from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

All you have to do i, Call to Belkin Support Number Inform the Technical agent that none of lights are not working They will do some troubleshooting steps but if the fuse is gone then it will not work and you cannont replace just the fuse
Belkin is having life time warranty and dont mention that it happen because it plugged in 220 outlet. They will be replacing with same model and if its not in market now then they will replace it with the better one.

Hi i got your issue

Try with the following steps ....

Step 1:Connect modem>>Router>>Computer

Step 2: Open the browser page and on the address bar type http://192.168.2.1

Step 3: Towards the left column below firewall click on virtual servers

Step 4: It will ask you for the password just leave it blank and hit submit

Step 5: Check whether any ports have been opened

Step 6: If not contact your x-box vendor and get the port numbers and the ip address of the x-box

Step 7: Come back to this page and enter all those numbers and click on apply changes

Step 8: I will give you an example how the numbers has to installed

Step 9: On description type -x-box ..
And on inbound port-enter the port number(as given by the x-box vendor)
And on thye it can be TCP OR UDP OR BOTH
Private is as same as that of the inbound port
Ip address is the ip address of the x-box

Step 10: Open all the port numbers and click on apply changes

Step 11: Towards the left column click on firewall and then disable it click on apply changes

Step 12: Hopefully this will work

If you any issues let me know or contact the 24/7 Belkin technical support 1800-2235546

Thanks .....
With regards....
Priya

Here is a direct link to the Forum http://www.dslreports.com/forum/r19257537-Help-Belkin-F5D82334-and-NAT-setting-with-Xbox-Live-360 Let us know if it worked Have a good day

make sure the wireless is turned on the computer
if so connect computer with the router with ethernet cable
open internet explorer and log on the router 192.168.2.1
submit and go into the wireless settings and turn it on

if that does not help call tech support at

877-736-5771
800-223-5546 ext. 2263

You will have to update the firmware manually

Goto the website www.belkin.com/support

Click Routers

Under No 1 : Select N / G / B.... As given in the router

Under No 2 : Select the Model Number of the router

Under No 3 : Select the Version Number

Click next

Click on the link For firmware update ..... Download the appropriate version as your router

Save the file

on the address bar of internet explorer type http://192.168.2.1 and hit enter

On the left under utilities click firmware update

Leave the password blank and click submit

Click browse ,,, Locate the file you had downloaded and click update

Click OK For confirmation

COD problems?

Here you go:

http://adamcook.wordpress.com/2008/04/04/how-to-get-flawless-online-gaming-with-your-ps3/

there is nothing like changing the NAT , but yes you will get rid of this message on you PS3 or XBOX once you open the ports on you belkin router .

* TCP 80
* UDP 88
* UDP 3074
* TCP 3074
* UDP 53
* TCP 53

turn off the firewall , enable upnp and assing a static ip address on your gaming device

Just reset it! At the back of the router is a small hole.With a toothpick or some like press gently for 30 seconds and wait for the router to start up again.Log in to http://192.xxx.xxx and start a new configuration..

If you need more help come back.

Post / thumbs / testimonial are welcome!

WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

BELKIN ::::



WIRELESS SECURITY ISSUES

Step 1 : Connect Router - Computer ( Wired)

Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3 : On the left under wireless click wi - fi protected setup

Step 4 : Leave the password blank and click on submit

Step 5 : Disable it and Click on apply changes

Step 6 : On the left under wireless click Security

Step 7 : Enable 64 Bit WEP

Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )

Step 9 : Click apply changes

Step 10 : on the left under wireless click channel and SSID

Step 11 :Change the Wireless channel to 6

Step 12 : Change the SSID to a different name ( no Spaces )

Step 13 : Click apply changes

Step 14 : Now Scan and connect to this network ( Wireless )

Let me know if it works


Regards
TOM

Hi Clark,

I got your issue, Inorder to enable the security on your belkin router

1. Open Internet explorer and in the address bar type 192.168.2.1 and hit enter
2. You will be logged into the belkin router setup,it will ask for login password, leave it blank and click on submit
3. In the left side Under WIRELESS , click on SECURITY
4. If the security mode says disabled, click on drop down arrow and select 64 bit WEP and it will show up KEY1, in key 1 type any ten digit number (2nos in each box) and apply changes

From now your network is secured with WEP security.

Thanks & Regards,
Prema.