Top 20 Belkin (F5D8231-4) Wireless Router (F5D82314) - Page 2 Questions & Answers

The NAT settings are in the game (console) it self, NOT in the router... The NAT term for a router is Network Address Translation... I don't know who had the bright idea to use the term NAT for game settings but he was an IDIOT... I think the term NAT in the gaming world is for controlling user access nothing to do with Network Address Translation of a router.... your router uses NAT to Translate IP addressing from the WAN side to the LAN side (OK this might be to technical for you) but in other words it is what the router uses to Translate the traffic from the WEB to your HOME NETWORK... nothing to do with gaming what so ever...

Make sure the you are wired correctly. 1) The incoming cable/dsl to the modem. 2) The modem to the WAN (Internet) RJ 45 connection on the router. 3) The router wired to the computer during set up. You can not set up the router unless you are hard wired to the router.
Then try connecting using the IP address Belkin sent you. Probably 192.168.1.1 or 192.168.0.1. Use Internet Explorer.

On your router configuration page (192.168.2.1), you should see a link for the DMZ, put your Xbox 360's IP in the DMZ, and save it. You may want to set your Xbox up with a static IP for this. It puts it outside the network and requires no port forwarding.

Hi,

You set your passkey yourself when you setup the router. During WPA, WEP setup, its asks what passkey do you want to use for security.

If its your own router and you forgot your passkey, reset it from the small button given at the backside.

In case its not your router, you have to ask its owner for the passkey, else you wont be able to access it.

Please vote the solution if found helpful.

login problems to and from modem.

check your dsl lights or cable lights

and also make sure you are plugged in to the WAN part from the modem to router.

Once you have that check turn off modem for 3 minutes also have router turned off.
turn on router first wait 1 minutes then turn on modem. you might have to reset router to defaults.
depends of you bought it new then i wouldnt worry about resetting it.

Unplug both devices, the plug in router first then plug in modem to see if that helps.
you might need to get the PPPOE setting too. usually its the full email address and password.
since you gave no detail on what comapny you have and what service you have im shooting in the dark here. :) I’m happy to help further over the phone at https://www.6ya.com/expert/david_92c86cbc79e9b552

the login for belkin routers is usually 192.168.0.1 and you don't normally need a password

I was facing a similar issue a while ago when I stumbled upon www.ijinni.com. The site was exceptionally well laid out and easy to navigate. All I had to do is, pose my question. The resolution was provided very promptly. They offer some excellent technical guidelines which cover a wide range of topics from installing network drivers to cleaning your mouse JUST FOR $10. So if you are looking for online technical support for any kind of computer related issues with knowledgeable specialists who come up with perfectly acceptable solutions, www.ijinni.com is the right pick.

There are 4 ways to reach them.

1. Once you open the website just click on the live chat where one of the IJINNI technicians will be in touch with you.

2. If you have Skype installed in your machines just add the contact "ijinni.com" (free call).

3. You can email at [email protected]

4. You can dial at +1 512 879 3546.

For any issue you are facing with the computer just call IJINNI

Clean, straightforward and effective!

Make sure your wireless internet is enabled on your router and that your computer supports wireless internet. Also, make sure that your computer supports the signal your router puts out.

Hi,

You can open the NAT settings of you router by accessing the router page. And by following the steps below.

1. Connect Modem - Router - Computer (Wired)
2. Open Router Setup by typing http://192.168.2.1 on the address bar of your browser
3. Leave the Password blank and click submit
4. Scan and connect in the Xbox
5. Get the IP Address of the Xbox
6. On the left under Firewall Click DMZ
7. Enable the IP Address of the Xbox/PS3/Wii in it
8. On the left Under Utilities click System settings
9 Enable UPnP then check the connection.

Thanks for using Fixya.

Hello, just push the reset button (with the point of a pen) for 60 seconds then he will restart (reset button is some thing like a very small hole elsewhere in the router).
success!

connect your computer wired to the router
open the internet explore type this in address 192.168.2.1
on left side grey vertical column click on firewall - disable firewall
on left below firewal u have virtual server click on it and just add this port number which i give
open the following ports in the router
Vpn ports no: TCP- 1723,443,10000
UDp- 1701,500,50,51

when u open this ports your VPN wil work for you

Let me know if it works

Thanks & regards
Milan

#0038 Firmware update
Use the Product Selector below to get the latest Downloads, Drivers, Firmware Updates, as well as Troubleshooting Advice, How-To Articles and FAQs

Yes you can reset your router to factory defaults. You should find a little hole on back of unit near the power plug hole.

Insert a straighten paperclip while power is on. Hold it for about 10 seconds. After that, unplug power on your modem and the router. Plug back the power on the MODEM FIRST and wait 1 min. Then plug back the power on your router. Wait about 20 sec and the internet should be ok now.

If you still have the setup CD, go ahead making your setup and choose a new passcode. If you don't have it you can email me and I will guide you with manual access to your router settings.

[email protected]

You need to access your router and set uPnP to enabled.
to do this you have yo use your browser to access the router - the address for the router will be an Internet Protocol (IP) address.
Log into the router and select uPnP (usually on the security or advanced option)
if you let me know the make and model of your router I can give you more specific instructions.
If your router does not have a uPnP option (and this is very unlikely) again let me know and I can give you detail on port forwarding and how to do it.

Open INTERNET EXPLORER and. (In the URL address field), enter the IP address for your wireless router ( the DEFAULT GATEWAY. This information should be contained in your router's manual. If you cannot find it, enter "198.168.1.1" as the address. This is usually the default IP address for most routers.do not type "www" just the number
Enter the username and password for your router. This should also be supplied in the router's manual. If you don't have this information, go to routerpasswords.com and find the brand and model of your router. This site lists the default login information for most wireless routers you can try "ADMIN" for user name and "PASSWORD" for passsword.
You should now be able to see your wireless router settings. You can configure your network ports, as well as SSID (wireless network name) and passwords.

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem


Regards
TOM

Connect Router - Computer ( Wired )

Open Router Setup by typing http://192.168.2.1 on the address bar of the internet explorer

On the left Click on Firewall

Leave the password blank and click submit

Disable it and click apply changes

Check if it works

If it is not working then ..

Contact your VPN Client and get the port numbers (TCP And UDP )to be forwarded through the router
And if you get the numbers .. add a comment with the port numbers so that we can continue the troubleshooting

Tom

Hello your Belkin Routers has a Firewall Feature on it which might be blocking you to Play games on your Xbox.

To Solve this Issue you Just have to open Ports on the Router For your Routers Ip Address or Enable DMZ ( De-militarized zone). Which will Open all the Ports on the router for an Ip address.

---> Steps to Enable DMZ on the Belkin Router


- Connect your Computer to the Router using an Ethernet Cable.

- Open Internet Browser & Goto 192.168.2.1 it will take you to Router Setup Page

- Towards your Left Pane Click DMZ Under Firewall

- Leave the Password Box Blank & Click Submit



- Check the Enable Box

- In the Private Ip Box Type in any Numbers in range of 2 - 254. EG: 192.168.2.9

- Click Apply Changes

- Unplug the Power Cable From the Router & Plug it back After 15 seconds

> Now Let us Assign the Ip Address on your Xbox

- In the Xbox Dashboard

- Go to My Xbox and Open System Settings

- Select Network Settings, Configure Network.

- On the Basic Settings tab, select IP Settings, then select Manual.

- Select IP Address, enter your chosen IP address EG: 192.168.2.9, and select Done.
- Select Subnet Mask, enter the Subnet mask 255.255.255.0, and select Done.

- Select Gateway, enter the Default gateway 192.168.2.1, and select Done.

- Select Done to save your settings.

- Go Ahead & Test your Connection.

:)

PS3 And XBOX :: BELKIN



Step 1:Connect Modem - Router - Computer (Wired)

Step 2:Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer

Step 3:On the Left click firewall

Step 4:Leave the Password blank and click submit

Step 5:Disable it and click apply changes

Step 6:Scan and connect in the Xbox/PS3/Wii

Step 7: Get the IP Address of the Xbox/PS3/Wii

Step 8:Open Router Setup in the Computer

Step 9:On the left under Firewall Click DMZ

Step 10:Enable the IP Address of the Xbox/PS3/Wii in it

Step 11:Click Apply Changes

Step 13:On the left Under Utilities click System settings

Step 14:Scroll down to the bottom

Step 15:Enable UPnP

Step 16:Click apply changes

Step 17:Test the connection ,Check the NAT

If working then let me know

======================================...
If it is still not working

Open Router setup

At the middle Under internet settings check the WAN IP

IF it starts with 192.168. or 172.16 Then you will have to contact your internet service and ask them to bridge the modem

Hi,

Welcome to Fixya. If you want to make your connection secure by using a password you need to access the router settings page and change the security type. Follow the instruction below on how to make the connection secure.

- You need to know the ipaddress of your router. You can refer to the manual or check the Default Gateway of your computer (Make sure that you connect the computer to the router using an ethernet cable for you to get the Default Gateway). Click on START then RUN. Type CMD on the small box on the lower left of the screen. Type IPCONFIG on the black window and get the value of your DEFAULT GATEWAY (it starts with 192.168.x.x).

- Open a Browser, Type the DEFAULT GATEWAY or the Ipaddress of the router on the address bar of your Browser. It will ask you for a username and password. For Belkin Router it usually ask for a Password. If it ask you for a username and password just leave it blank

- Click on Encryption, You can select either WEP, WPA or WPA2 to make it secure. Then personalize a password. Then confirm the changes try you wireless machine to connect.

Make sure you connect to your SSID and enter the personalize network key. Network key serves as a password on the network so that no one can access the internet unless they knw the password.

Thanks for using Fixya.