Top 20 D-Link Xtreme N DIR-655 Wireless Router Questions & Answers

What kind of construction surrounds your router? Weak signal indicates walls reducing signal strength. Try a repeater in weak areas.

I would look to see if there are any nearby wireless networks residing on the same or adjacent channel. If so, change the channel the router is broadcasting the network on as this can easily cause the types of issues you are describing.

Make sure the power setting does not allow the ethernet card to be shut off. Also look through the other settings on the ethernet card properties menu. Some of those affect the stability of the connection. You access the setting through device manager.

Make sure you use the correct cable between the router and the D-Link. If you use the blue wire it won't work. The orange and orange white pair have to be swapped with the green- green/white pair on one end of the cable only. Usually, the cable is orange in color and is called a crossover cable.

Internet search using Google or Yahoo will give you more information on your router than you could ever decipher!

ftp://ftp.dlink.com/Gateway/dir655/Apps/RouterSetup_dir655_410.exe

go into the router page at: http://192.168.1.1 or http://192.168.0.1 or http://192.168.2.1 login then go to wps, thats the 8 digit pin. You can hack it using a rtl8187 wifi adapter, linux, aircrack-ng, and reaver-wps to crack the pin but it will take 6-8 hours from what I've read.

use an online unlock code solution provider

For setting up your resetting d-link router password you have to follow these steps.. 1. open your browser and type 192.168.1.0 and type user name and password 2.go to wireless settings and setup ssid ( network name ) and password 3. than click save and apply for more technical help you may can contact d-link Tech Support i hope this will help you thanks

Connect to you router using you browser and go to wireless settings. There you can set a wireless password. You can also set a password to login to your router itself

contact your provider and explain you need to reset your password and user name

Could be a number of things. Restore to default settings to see if that makes any difference. From there, test each change you make.

If the default password on the D-Link has been changed then - To reset the D-Link back to the default settings - Press and hold the RESET button at the back of the router with the power ON until the LEDs flash at the time the release the RESET button. (firmware version was 3.00, and upgraded to 3.05) Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. (SSID, WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access). Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

You need to contact your Internet Service Provider for the Internet setup configuration and then configure your router.

To setup your D-Link wireless router follow these steps. Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open the browser on your laptop/computer and enter the D-Link's configuration URL.. http://192.168.0.1 The default login = admin The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings. (SSID, WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access). Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

The printer needs to be setup on the network. Either wired or wireless, same principle applies. You have to install the drivers for the printer on your computer and scan or add the printer. It will show up as an IP or Device name.

Connect the ISP modem to main uplink port. Then connect pc to any other port. Done! There is a wizard for wireless setup up the setup / internet web admin page. 192.168.0.1 admin with no password is default, but check in case it changed.

Please find my tip that i have posted in fixya.com by clicking on the below link. Follow step 3 or 4 as per your situation.http://www.fixya.com/support/r7153937-lost_password_cannot_login_computer

can not get printer on line

To connect your computer to a wireless router, you click the Refresh network list, then Choose your wireless network and then click Connect to your secured Wireless Network, it will asks for a Network Key before allowing you to connect into your wireless network. This Network Key is either the WEP, or WPA or WPA2 Encryption key that is used to configure the Wireless Router. The Passphrase is an alternate way to setup the Encryption key. When you are requested for a Network Key, you can just enter the Passphrase that was used to configure the Encryption key in the wireless router. http://www.fixya.com/support/r5270415-network_password_network_address For information on securing your wireless network, configuring the wireless router and configuring the wireless card in the laptop/computer, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security