20 Most Recent Pioneer CDJ-800MK2 Turntable - Page 2 Questions & Answers

What is the problem?

THIS MAY WORK? LEAVE IT IN THE AIRING CUPBOARD FOR A FEW DAYS AS IT MAY HAVE A SHORT. THE 2 BUTTONS ARE QUITE CLOSE. IF NOT PROBERBLY NEEDS TAKING APART AND CLEANING OUT. HTH'S

According to Pioneer there are 2 possible faults associated with this error.

Option 1 - Error in mechanical operations Unrecoverable: Turn the power off. The error indication will be cleared. If the error still shows then it's Option 2.

Option 2 - Communication error between operating section and main section The error indication is cleared when the communication is finished (if it can finish).

Communication fault between the control interface (the PCB with all the switches on) and the main PCB (the motherboard in the base of the unit). It could be that the main ribbon cable that connects between the two has come loose or damaged. The control interface works on a digital PCM system, and if there is a problem with this, the motherboard throws a fit.

You can have a fuse problem only in you plug it diectly to 240V, the UK voltage. Check that the converter is a step down transformer, 240 to 110 volts. The system should work with 110Volts. If everything is ok, then you blew the system´s powersupply with the 240Volts. that is difficult to solve.

For General Service & Support call 1-800-421-1404
or contact us by e-mail
For Replacement Parts
call 1-800-228-7221
or visit Pioneer Parts Online

Try to clean the whole compartment too

thx,

djajay

Hello frnd,
You got problem with compartment of you CDJ. It needs an expert to open
and look out the problem.

thx,

djajay

hi there,
you need to clean compartment of the CDJ, there must be dirt which dont let the cd play, also let me know it you get any error code.

djajay

Laser pick may need cleaning or replacing.

Hope this helps.
http://www.technicsdjuk.com/
http://stores.ebay.co.uk/methleykev

CDJ800 lasers can and do fail.

Mk2 lasers are availble here :-
http://cgi.ebay.co.uk/PIONEER-CDJ800-CDJ-800-MK2-LASER-TRAVERSE-DECK-ASSY-NEW-/260616571438?cmd=ViewItem&pt=UK_Mixers&hash=item3cadf54a2e

email for more details [email protected]

1st check if there any pieces of paper or bits of sticky label inside. If that is not the problem then the "main cam" is the next suspect.

Look here for a new cam :-
http://stores.ebay.co.uk/methleykev

wipe it up using moist damp cloth ,slightly soapy, and invite her back to help you,

Chances are the laser has failed.
http://cgi.ebay.co.uk/PIONEER-CDJ800-CDJ-800-MK2-LASER-TRAVERSE-DECK-ASSY-NEW-/260616571438?cmd=ViewItem&pt=UK_Mixers&hash=item3cadf54a2e

e7201 is a toc error.If disc spins then you have a defective laser assembly

e8301 is cd player error at start up. you will have to take the top off and see if laser assembly is stuck from slideing in or out,it should be fully returned to the return switch,it should be close to the spin motor before spinning. also see if disc spins

Send to I A Electronics.2420 E 55th pl. Indianapolis,in.46220 see IAELECTRONICS.COM for website.We are a pioneer repair center

when removeing top cover you will see the power supply on top right side faceing you.there are fuses on that board. Some of the fuses will look like transistors, however will only have two legs,check all. chances are you may have one or more bad.

if you havent had your player repaired then you can contact me @ www.audiovisualservices.info

Hope this helps you.

Thank you.