20 Most Recent Olympus VN-2100PC Digital Voice Recorder - Page 4 Questions & Answers

Contact Olympus at 1-888-553-4448.

Do you have correct software for your PC O/S.??
I f you need soft ware go to www.olympusamerica.com

The 2100Pc is NOT compatible with Mac O/S...this can be verified by going to www.olympusamerica.com

Contact Olympus at 1-888-553-4448.

Software downloads are available at www.olympusamerica.com

The "ERR" message means a memory error. solution, is to reformat the memory. Try to press the STOP and DISP/MENU buttons at the same time for about 2 seconds, and then the display should show "FOR". It will erase the whole memory making the device usable again.

Regards

Contact Olympus at 1-888-553-4448 ; or they do have software downloads available at www.olympusamerica.com

Software downloads are available at www.olympusamerica.com or contact them at 1-888-553-4448.

Downloads are available at www.olympusamerica.com or you can contact them at 1-888-553-4448.

Once you have deleted files they are gone...there is no "RECYCLE BIN"...feel free to verify by checking at www.olympusamerica.com

Not sure what your after; but manuals and softwre downloads are available at www.olympusamerica.com

The VN-2100PC is not compatible with 64 bit O/S neither xp or vista or 7....sorry.
Available software downloads can be got at www.olympusamerica.com

Software downloads are available at www.olympusamerica.com

Yes you got a new computer but unfortunately the vn-2100PC is not compatible with 64 bit OS's neither XP 64bit or Vista 64 bit...therefore it will also not work with 7 64bit.
Feel free to verify by checking at www.olympusamerica.com

Check to make sure your operating system is compatable with unit and that you have current software....go to www.olympusamerica.com for software downloads and manuals.

Go to the link below to get the drivers for the camera. 2nd link down.

http://www.olympusamerica.com/cpg_section/software_results.asp?id=1270&os=w

Good luck please accept the answer. If you have any questions please ask.

Hello,

there is not way you can get your stuffs on the recorded if it does not turn on.

You can get the drivers for your recorder from the below link. Select your computer's operating system and you can proceed for the download:

http://www.olympusamerica.com/cpg_section/software_results.asp?id=1270

Secondly, you should also think of how the recorder can be fixed. The manufacturers of this recorder has repair centers, so you can contact the manufactures of the voice recorder or their repair centers by visiting the below link:

http://www.olympusamerica.com/cpg_section/cpg_servicerepair.asp

I hope this helps,

Good luck.

Software downloads are available at www.olympusamerica.com