20 Most Recent
D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) - Page 9 Questions & Answers
I am using dlink wireless
By using your wifi security.
Log on to the router and turn on WPA2 security, choose a password, and you should be ok
~hello,
i using this D-Link
Hello,
Access to the router using web interface and make sure that access point is enabled. You can reset it to factory settings by using a ballpoint or paperclip to gently push down the reset button in the following
sequence:
1. Press and hold the reset button while the device is powered off.
2. Turn on the power.
3. Wait for 5~7 seconds and then release the reset button.
You can use Router Commander for troubleshooting router problem also
I have D-Link DSL-2640T Wireless ADSL2/2+ Router
You need to log into the wireless router either by a computer that successfully connects wirelessly or by physically connecting with an ethernet cable. Once connected, log into the router by open a web browser (Internet Explorer, Mozilla Firefox, Google Chrome, Apple Safari), and typing the router's address (usually 192.168.1.1 or 192.168.0.1) into the Address (or URL) line. The default usernameand password is usually "admin" & "admin" or "admin" & "password". Once successfully logged in, look for a tab or link that says "Wireless" or "Security". You'll be able to change whether security is enabled or disabled, and the password associated with it. Your security options are WEP or WPA (or WPA-PSK). WPA-PSK is the most secure, but WEP is also an acceptable choice. Select the security option of your choice and either enter text into the passphrase generator or choose your own password and type it into one of the security key text fields. If you use a password that is not a plain english combination of letters and numbers, be sure to write it down so that you can enter it as needed on other wireless devices that need to access your router (ie-pda phones, game consoles, laptops, desktops, etc). Be sure to save changes so that the security settings and password is saved.
Let me know how you make out.
Nintendo wii will not connect to my new d-link dsl2640r router
To connect the Nintendo Wii to your wireless router, the following settings must be set to the router.
*Wireless Network Name (SSID) - must be one word
*Wireless Encryption/Security - must be WEP
*Network Mode - must be Mixed
Open your router's admin page using Internet Explorer and type http://192.168.0.1 and type your router's password. By default username is admin and password leave it blank.
When you get to the router's setup page, look for wireless tab then change the Wireless Security Mode to WEP 64-bits/10 Hex digits. Type in any 10-digit hexadecimal key on Key 1, then save your settings. You should remember the 10-digit key because you'll going to use it on your Wii settings.
On your Wii settings, try to reconnect to wireless network then type in your 10-digit key. That should do it.
Not finding what you are looking for?