20 Most Recent
D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) - Page 8 Questions & Answers
My system net is disconnected
It's difficult to say what the problem is. You can try to solve router disconnect using generic router optimization/hang and disconnects prevention Router Comamander software (freeware version available).
I have an D-Link ADSL2/2+
You can forward ports automatically, solve stability issues and prevent unauthorized wireless usage with Router Commander program. You can download it from softpedia.com for free.
I have mtnl connection with
Signal strength drop or fluctuation are common causes of RF interference.
Try these basic troubleshooting steps:
- Change the channel on your access point or wireless router.
- Change the location of your wireless products. Subtle changes
(2-3 feet) can make a big difference. Do not put the access point or
wireless router in a cabinet or enclosure.
- 2.4GHz phones, X-10, and bluetooth devices will interfere with
your wireless network. Change the location of the base for your phone,
or downgrade to 900Mhz phones, or upgrade to 5.8GHz phones.
- The wireless signal will degrade (or die completely) when going
through brick (fireplace), metal (file cabinet), steel, lead, mirrors,
water (fish tank), large appliances, glass, etc.
If your wireless connection is only dropping during large file transfers
or when a large number of wireless clients are connecting, change the
preamble on all wireless devices to short.
If you need more help come back.Post / thumbs / testimonial are welcome!
Windows7 is compatible with d-link
As far as i know I have not found any problems.
The router's wireless settings do not affect Windows 7, you may have trouble with the wireless card driver in your computer with Windows 7.
Where can i find my Wpa key on my router ?
Hi,
This Utility program from HP will help you locate few details on your network
1. SSID ( network name )
2. WEP/WPA Key ( Your network security key )
3. The PC/Laptop IP Address
4. Router IP address
5. Which all Devices are connected to your Router/Network Wireless
6. Which all Network are available nearby your place
7. Let you access the Router Configuration
Click here to Download the HP Network Diagnostic Utility
Download the file on Desktop and Run the program ( Ex. File name = HPNDU.EXE )
Follow the Instructions on the Screen and do accordingly.
Regards,
Ron
How can I find device
Hello, the default username AND password for most routers is 'admin' all in (lowercase) and without
the ' '
regards,
Nicam49
My Router is of Dlink
Try to upgrade the firmware of the router. Firmware is the software of the router.
Download the latest firmware of the router. Go to the manufacturer's web site and download the firmware of the router.
Open the set up page of the router and upgrade the firmware of the router. Once you upgrade the firmware of the router, reset the router.
On the router you will find a small reset button, hold it down for 30 seconds. release it. wait for 1 minute. Now unplug the power to the router and plug it back in.
Now you will need to reconfigure the router according to the Internet service provider.
Click here for step by step instructions.
If i connect a pc
If you connect the computer to the router , it works.
That means the wired connection is OK.
Open the set up page of the router check the wireless settings of the router.
I think your network is secured and you are not typing the correct network key.
just open the router set up and check the wireless settings .
Make sure that the DHCP server on the router is enabled
Click Here for step by step solution
Hooked modem up to AT&T
1. have you check the status of the router that is gone into the router to see if you have an IP assigned
2. have you check each Ethernet cable with a known good one
3. have you check the network card to see if it is working properly that is by going to the DOS prompt and do an ipconfig /release then renew
check 1st by doing an ipconfig /all to see if you have an IP.
How do I secure my belkin router?
use a hard wired computer
make sure on router the Ethernet light is on (number 1,2,3,4 anyone )
open IE and type 192.168.2.1 on address bar (just number -no www or http://)
you will find a GUI of router
left side under wireless select security
username and password - just hit submit
you will find the first option as disable - click there and select wpa/wpa2 and type you password in the 4th box says passphrase and hit apply changes
once it is done click left side on channel and ssid and ull see the ssid (name of network) give a very new name and hit apply changes
your router will be secured then
Hi, I have D Link
Just download and install Router Commander software, the program will prevents your connections from idle disconnects and other router problems.
Not finding what you are looking for?