20 Most Recent
Brother MFC 240C All-In-One InkJet Printer - Page 8 Questions & Answers
How do I do double-sided
Flip the copy over and reinsert into paper tray and then copy the second side of your original. This is not a duplex model.
Brother MFC 250C has no
For general troubleshoot of any no power device is always just:
Try a different power cord (these cords are all the same, you can use a standard computer cord)
Try a different power outlet (no surge protector, direct to wall to a known working outlet)
If it still gets no power at all the the power supply has probably gone bad and will need to be replaced.
If the machine is out of warranty however the cost to repair it will probably be more than the cost of replacing the unit with a new one.
Your best bet would be to call around your local printer repair shops and see if they have any of these models on hand as spare part donor machines.
Hi my printer is a
You'll have to run the cleaning mode a few times,
to do so you'll have to get into Maintenance Mode.
To do this:
Press MENU then * then 2 then 8 then 6 then 4
This takes some practice and you have to press them all within a few seconds.
If the machine doesn't say MAINTENANCE when you do it press STOP/EXIT and try again.
When in Maintenance Mode:
Press 7 then 6, then press 3, then press BLACK START
It will say Cleaning - this will take some time when it's done it will go back to MAINTENANCE
After it's completed try 0 then 9, this will print out a small Print Quality test page
it should have several rows of each color (Cyan, Magenta, Yellow and Black)
if they still don't look right then run the cleaning mode again and then print another quality page.
Continue to do this until the quality is back to normal,
when you're done to exit maintenance mode press 9 then 9 to return to normal operation.
note: this cleaning mode uses up a fair amount of ink, use sparingly
note:
maintenance mode is for brother technicians and has some codes that can
damage your machine, only use the codes I've explained in this solution
If this doesn't resolve your issue you may need a replacement print head,
this is an expensive fix if the machine is no longer under warranty.
If it is under warranty contact Brother and they will arrange a meeting with a local technician to repair it for you.
How do I change the answer ring from 2 rings to
Press Menu, 2, 1, 1.
b Press a or b to choose how many times the line rings before the machine answers (00-04). Press OK.
If you choose 00, the line will not ring at all.
c Press Stop/Exit.
How do i clear the
Press menu*2864 within 3 seconds. the screen will show "maintenance". now pres 01 and it will initialise. Press 55 and wait for maintenance again. now press 99 to exit back to date and time.
the machine will have cleared all its memory and returned back to default.
It appears that the yellow
some solution.
ry to clean by properties of program on your computer.
then you try to print some text or image use yellow ink only..
but if it doesn't changed. try to reinstall the driver.
Why do printhead give problems especially black
Inkjet printers need to be used frequently to prevent inkdrying out in the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer thanreplace the print head.
Not finding what you are looking for?
