20 Most Recent
Zircon Dimension Pro 4.0 Ultrasonic Measuring Tape - Page 4 Questions & Answers
Owner manual for Ultronic weather clock
Press the "Down" button to toggle between Celsius and Fahrenheit.
Press the "Up" button to turn the alarm on and off.
For complete instructions on the Ultronic clock thermometer, see:
https://pdfslide.net/documents/ultronic-clock-cl-266instructions.html
Fluke 87V Continuity test; Sometimes a solid beep. Other time a continual rapid on/off beep?
Open the manual. Press CTRL+F and type 'beeps' and press enter. There are 19 mentions.
https://www.transcat.com/media/pdf/80vUserManual.pdf
The continuity test features a beeper that sounds as long as a circuit is complete. The beeper allows you to perform quick continuity tests without having to watch the display. To test for continuity, set up the Meter as shown in Figure 4. Press E to turn the continuity beeper on or off. The continuity function detects intermittent opens and shorts lasting as little as 1ms. A brief short causes the Meter to emit a short beep.
Was there a Diode in the circuit?
A short beep sounds if the diode is good (< 0.85 V). A continuous beep sounds if the reading is ? 0.100 V. This reading would indicate a short circuit. The display shows "OL" if the diode is open.
and also
Enter MIN MAX recording mode. The Meter is locked in the range displayed before you entered MIN MAX mode. (Select the desired measurement function and range before entering MIN MAX.) The Meter beeps each time a new minimum or maximum value is recorded
Need help recalibration get a SLR202GR laser level
Hi, all electronic rotary laser levelers have an electronic calibration that you can do yourself, you just need to know the correct algorithm to control the buttons. Look here (https://laslev.com/reviews-laser-levels/firecore/automatic-rotary-laser-level-firecore-fre207r-servo/) for an example of this unit, it describes the entire calibration algorithm for the X-axis and the Y-axis. The buttons may be slightly different, but the principle is the same, I'm sure you can do it, there's nothing complicated there.
On my wireless weather station the last step has e d f I s not in that order just one letter each time I push what is it for
Hi Kyle,
It is impossible to give you complete information without the Manufacturer name and the model number.
My guess is that you are pushing the mode button and skipping through 5 sets of settings. when you see the "e" push the up and down and you will probably see this sequence "e,c,m,p" if so, (or similar), that will set your time zone to Eastern, Central, Mountain, or Pacific.
The "d" is likely for the Daylight savings time, use the arrow when you see the "c" and if you see "d,s" those are for Daylight savings, and Standard.
I really am "shooting in the dark" without a make and model #.
Good luck.
Steve
Not finding what you are looking for?