20 Most Recent
Abit NF-M2S Motherboard - Page 2 Questions & Answers
Boot off IDE with SATS drives present
I tried to put ide with SATA and got the same I think IDE and SATA do not mix unless you know how to set up.
Easiest and cheapest in long run use one type of drive
NF-M2S restarts.
Hi! Hope this helps. Please consider other components or cards installed on your motherboard. Please try removing one at a time then have it start and shutdown if it works. For harddisk management please see the power management at control panel, select the how or when you are goin' to set your harddrive sleep, standby, etc.. We had also met "Standby Mode Problem", by cleaning viruses, spywares and even the registry it can be fixed. Please search for the right and specific tools. Goodluck!
NO POWER TO MOTHERBOARD
Doublecheck your powerswitch connection on the MoBo header. Also ensure that everything else on the header is seated correctly and tightly.
The case button may also be at fault.
You will then need to start methodical testing.
Sart with the PSU connected to a known good system. if that works you eliminate the PSU (You did turn tis on on the back didn't you! ;-)
If that Doesn't work try a known good PSU on this system.. If that works you for sure know it's the PSU that's dud.
If you have a spare Mobo try swapping the parts into that.
If it's a brand new board then it may be DOA, it does happen, but unlikely. Anthing else after the board actually gets power will mostlikely produce a beep code if nothing else.. Silence and not running is most likely one of the above.
If my solution was helpful please vote for me!
How to connect 2 cd-roms to motheroard
If they use the wide ribbon cable, you need the cables with two connectors. Then set on drive to master and one to slave, or set both to CS - for cable select. When you restart the computer, the OS will do the rest.
Kds monitors support
Hi Klex,
I was able to find the website address
www.kdsusa.com through one of their products on Newegg, but the site appears to no longer exist. They also had a phone number listed (1-800-283-131) but that too doesn't seem to work. I have the feeling that they have either close their business or ended their operations in the U.S..
Sorry I didn't have better information for you.
Not finding what you are looking for?