20 Most Recent MSI K9MM-V Motherboard - Page 7 Questions & Answers

http://www.mediafire.com/?k4m6t2zhiqf726r

http://www.msi.com/index.php?func=driverfile&dno=2422&i=0

test all the leads that attach to your hard drive IDE,SATA the ones that attach from your motherboard to hard drive

After reinstalling/installing an Operating System you can lose the Audio Drivers or sometimes they just corrupt.. Try reinstalling the Audio Drivers from the disk provide with your P.C./Laptop. If you no longer have the disk just visit the website of the makers of your P.C./Laptop or Motherboard and download the Audio Drivers from there, after that install them.
Thumbs up please if this works for you, thanks.

Total of 1GB is min. for day to day operation.

If your are going to view movie and do other operations then bump it up to 2-4GB system ram.

Ram is cheap.

I will start with 2GB total.

Click on the link below, select your operating system and download/instal driver. Good Luck! Ian.

http://driverscollection.com/?H=K9MM-V&By=MSI%20(Microstar)

The video chip from it is truly old and weak. To get Aero you need a much better one so buy a separate video card - a good one.

city center

try to delete upper and lower filters on the registry to make your cd/dvd properly working

http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1104
have you loked there?

agp cards only work on agp and pci on pci can not put epci cards on board ok jim

You will need to reinstall the sound drivers. Go Here http://www.msi.com/index.php?func=downloadindex Enter the model of your board and download the drivers for your operating system, then install them..

Dear User,

Pl Take Your Motherboard Make and model no with its diagram.

(1) Diagram contains inbuilt speaker pin where to connect wire.
(2) Anoter way please see on your motherboard small pin when wire hang. Read Carefully around pin in small latters for speakers pin.

run your pc in safe mode after log in right click ,click properties then click setting,click advance,then monitor and change the ca frequency to 60 hertz

you can downlod the driver from this link http://driverscollection.com/?H=K9MM-V&By=MSI%20(Microstar)

see that picturre above...

the sequence of the wires are :

from right to left ok

power button
reset button
power led
hdd led

Make a bios update first.
Than re-install all drivers and restart every time.
Take the latest drivers from there
http://www.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1104