Top 20 Sony BRAVIA KDL52XBR2 Television Questions & Answers

Serious! If the TV is new, you may check your homeowners insurance for a replacement. The Power company can Verify the power fluctuation for you. When an appliance receives a Power Surge like that, the sensitive electronics are damaged or weakened. For PROTECTION: Get a 1000Watt UPS and use it between the house power and the TV. http://www.tigerdirect.com/applications/SearchTools/search.asp?lowprice=50&highprice=99.99&keywords=1000W%20UPS&cat=&mnf= Try This.

Sounds like the TV may be hooked up to a source with too much voltage, or getting overpowered in some other way. This is a safety hazard; if it's hot enough to melt the screen cover, it's hot enough to explode without warning. This isn't something you should try to fix yourself; call it in for servicing if you can. In the meantime, you should keep it unplugged.

HI MAIN BOARD OF THE LED IS DEFECTIVE MEAN AUDIO SECTION GOT SOME PROBLUM PLEASE REPLACE MAIN BOARD THANKS M NASIR

The three top Best Buys in Which? magazine were all Samsung. So that sounds good.

6 blinks denotes a fault with its main board. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

You can find the information about this problem in user manual

Set the MTS option to "Auto SAP". See page 35 of the manual at http://www.docs.sony.com/release/KDL52XBR2.pdf

HelloThere is some loose solderings or leaky ceramic capacitors at the audio output section of your sound card. Check it.

my sony bravia BX42 has a color green horizontal line and it makes bigger and bigger until some color pink was appeared then I am worried if it will not turn to normal as it goes :(

Find out where the "audio settings" menu is. Make sure the audio settings is set to "Stereo", instead of SAP.manual at link below....http://www.retrevo.com/support/Sony-KDL-52XBR2-TVs-manual/id/274bh528/t/2/

it will only light up if the program has an SAP broadcast not all shows or channels have a Secondary Audio Program broadcast

This problem can be fixed by Qualified Technician.don't worry your LCD Screen is alright and this is not a big issue.

That sounds like an antenna problem. Try moving your antenna around and rescanning the channels.

If you press the INPUT button on the TV remote you switch to your various inputs, you have HDMI 1 selected. The info banner will display each time you switch channels or inputs. Press the DISPLAY button on the TV remote. Press again if info does not go away after 10 secs. Check your INITIAL SETTINGS on the TV to fine tune this kind of option.

Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.

• No video, Power light is on or blinking.
• TV is making a clicking noise.
• TV takes a while to come on
• Screen is very dim or flickers.

Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.



Capacitor being replaced! Fairly easy DIY fix.


Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.

Now the tv u turn on?Ur tv now,have no power to the tv at all or the tv have a red or green LED power light indication is flashing only?Yes,than the tv power supply board is the causes and the problems.That the tv board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

do you run a cable box from your cable provider with digital service?

Hello

Just reset the TV to factory settings and retune it using auto tuning fuction from the Menu option.

To reset it to factory settings, do the following:

Turn on the TV. While holding down "UP arrow" button on the remote control, press the POWER button on the TV. [The TV will turns itself OFF and then back ON again. Release the "Up Arrow button.

This operation will clear all your customized settings including Paremtial Lock settings.
in otherwords, this is the process to unlock the TV if it is locked.
Retune it by autotune fuction. All the lost stations will emerge again.
Ok.

YOU HAVE A BAD INVERTER YOU NEED TO CHECK TO SEE IF THERE IS 30 VOLTS ACROSS THE INVERTER ALSO CHECK TO SEE THAT ALL THE FUSE ARE NOT BLOWN ANOTHER ISSUE WITH THESE TV IS THE LCD ITSELF BUT 9 OUT OF 10 ITS THE INVERTER OR THE POWER SUPPLY PLEASE CHECK THE FUSE ON THE INVERTER THATS USUALLY A BIG PROBLEM

You don't. The set knows if the cable provider is sending HD or analog. Not every station is HD.