20 Most Recent
Sony BRAVIA KDL52XBR2 Television - Page 2 Questions & Answers
My kdl52xbr2 blinks to a
Plasma and LCD TV sets are prone to having capacitors in the power supply section fail. This is the most likely cause for the probem you describe. When capacitors fail your will commonly see one or more of the following symptoms.
- No video, Power light is on or blinking.
- TV is making a clicking noise.
- TV takes a while to come on
- Screen is very dim or flickers.
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.
Here are pictures of capacitors...Notice that the ones below look bloated. They have failed and will need to be repalced.
Capacitor being replaced! Fairly easy DIY fix.
Again, You can get a power supply repair kit with the parts, detailed instructions, and support from sites such as www.TvRepairKits.com . Or just click here to see more details on their kit.
I smelled something electrical overheating
Now the tv u turn on?Ur tv now,have no power to the tv at all or the tv have a red or green LED power light indication is flashing only?Yes,than the tv power supply board is the causes and the problems.That the tv board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
The MTS/SAP option on my
it will only light up if the program has an SAP broadcast not all shows or channels have a Secondary Audio Program broadcast
I have a grey band
If you press the INPUT button on the TV remote you switch to your various inputs, you have HDMI 1 selected. The info banner will display each time you switch channels or inputs. Press the DISPLAY button on the TV remote. Press again if info does not go away after 10 secs. Check your INITIAL SETTINGS on the TV to fine tune this kind of option.
I have a Sony Bravia
YOU HAVE A BAD INVERTER YOU NEED TO CHECK TO SEE IF THERE IS 30 VOLTS ACROSS THE INVERTER ALSO CHECK TO SEE THAT ALL THE FUSE ARE NOT BLOWN ANOTHER ISSUE WITH THESE TV IS THE LCD ITSELF BUT 9 OUT OF 10 ITS THE INVERTER OR THE POWER SUPPLY PLEASE CHECK THE FUSE ON THE INVERTER THATS USUALLY A BIG PROBLEM
Have lost all my hd tv stations
Hello
Just reset the TV to factory settings and retune it using auto tuning fuction from the Menu option.
To reset it to factory settings, do the following:
Turn on the TV. While holding down "UP arrow" button on the remote control, press the POWER button on the TV. [The TV will turns itself OFF and then back ON again. Release the "Up Arrow button.
This operation will clear all your customized settings including Paremtial Lock settings.
in otherwords, this is the process to unlock the TV if it is locked.
Retune it by autotune fuction. All the lost stations will emerge again.
Ok.
One week ago I purchased
Hi,
If standby red light is blinking on tv front that means tv got some internal problem, since tv is new so would be under warranty, call Best Buy or number written on tv documents and ask warranty cover.
Any attempt to fix tv by yourself will void warranty.
Let me know if you have additional question.
Thanks.
How do I change the
You don't. The set knows if the cable provider is sending HD or analog. Not every station is HD.
We can get analogue tv and foxtel chanels but we
unplug the power cord plug from the tv then unplug the antenna cable look inside the antenna metal peace make sure the wires are not touching to each other first connect back the antenna plug then the power cord if its an interior antenna your problem is the antenna
The left half of the
Hi,
OK I would like for you to open unit and in the middle of the panel is the T-CONN board, it has the LVDS cable going to it and the main board. First try to wiggle the LVDS cable to make sure no loose connections while set is on. Next disconnect LVDS from T-CONN board make sure to not let the cable touch any metal turn set on and see if screen lights up and with a clear screen. If not OK some models won't let you check this way. But if it does the panel is not faulty it is OK, LVDS or main board or T-CONN issue. So let's hope it's the CABLE, LVDS is loose. If you isolate inside the unit you may find your problem much quicker.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
Not finding what you are looking for?