20 Most Recent Disney Pix Micro Digital Camera - Page 2 Questions & Answers

reset the camera, and proceed. God bless youThe reset button is usually located on the base or the back of the camera. The reset button sets the camera back to the original factory settings. If the camera still does not power on, contact for Get support for servicing and repair.

USB is to download pictures and not to charge batteries - read manual

Plugging the card into a card reader (either built-in to the computer or connected via USB or FireWire). Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

HiThe drivers?Did you install the camera drivers on your computer?If so,check your camera driver's compatibility with the Operating System on the computer you're installing on.D o this by searching for your cameras drivers on the internet.

Hi I had a look at the following website for you, and it refers you to use the software that came with your camera, do you have this? If so, then you will need to run the disc and follow the on screen prompts. I have found a user guide for you: ftp://ftp.digiblue.com/qsg/Disney_Micro_Guide.pdf Hope this helps you.

AAA battery runs the camera which can be replace by opening the camera by pressing small button available besides the camera handling chord. Press it with a sharp object like tooth pick and gently open the camera by sliding your nail inside

Heard this before, and the reply from Disney was buy a new disc. Try their webpage for support. If you can prove purchase you mightv be lucky But dont hold your breath

Use a card reader is the most easy way to solve this problem. Win7 is a new OS, and may drivers for it are not so comprehensive. What's more, use a card read is convenient and which can save the life of your camera

no tengo el cd quiero que reconosca mi computadora el sofware

how to edit?

Yes

Hi Leewolf,

Try this solution that was previously posted on FixYa:

My daughter just received one of these camera's for her 6th birthday and is extremely excited. I am running Windows XP and was getting the "No pictures on camera" error. I tried downloading the drivers for this but that did not work. Here is what I did to get the camera working:

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"), will probably have the yellow exclamation mark on it saying that it is not working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" has not passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

After doing this I am able to download the pictures and everything works great. I hope this helps.

Did you install the driver software?

Will not work if not installed?

Hi, try:

To install the battery:

Note: To open the battery door, you will need a paper clip or thin pen.

1. Take the paper clip and use the end to press down on the door latch.

2. Holding the latch down, push the battery door up.

3. The door will slide up and spring open, allowing you to access the batteries.

4. Place the battery into the compartment. Be sure to match the (-) on the

battery with the (-) inside the compartment.
5. Slide the battery cover to its original